傻b仔 發表於 2014-12-10 09:29 static/image/common/back.gif
我睇左份白皮書一晚.....都唔見FH 係ATMOS 既擺法WO........
SORRY, 我既講法有小小誤導, 我想講呢個FH既擺法都係冇計中的權宜之計咁解~~~
Dolby Atmos object audio renderer
The Dolby Atmos object audio renderer is essentially the brain of a Dolby Atmos hometheater. Dolby Atmos content consists of both sound objects and metadata that includesinformation about where those sounds should be placed and how they should move, along with other data such as the type of object represented. The Dolby Atmos object audio renderer knows the speakers available in your system (you’ll supply this information by following the setup instructions provided by your AVR manufacturer) and determines which speakers to use from moment to moment to recreate the sound the filmmakers intended.
Depending on the receiver configurations, the Dolby Atmos object audio renderer can support as many as 34 speakers—24Traditional floor-standing speakers and 10 overhead or Dolby Atmos enabled speakers—along with one or more subwoofer(s). The renderer also supports smaller configurations, making it fully scalable and adaptable to a variety of home theaters.
itoy2008 發表於 2014-12-10 10:44 static/image/common/back.gif
傻B仔，未就係冇，所以咪分享下；香港地方細，人再加上上atmos既碟又唔多，Atmos-PAC FH 可對香港hifi 友 ...
我都只係分享下意見JE...
地方細既咪玩5.1.4 LO......做咩要咁樣玩7.1.4.....SB D 聲又係天花落.......咪影響ATMOS 既定位LOR...
另外....如果ATMOS 可以用FH 代替....咁佢都唔駛出對反射喇叭啦,.............
傻b仔 發表於 2014-12-10 09:37 static/image/common/back.gif
下.....我想問一問...咩叫針對技術性問題呢???
咁樓主開得POST 出黎教人擺ATMOS.....自然會有人問下佢技 ...
傻B仔兄, 我呢個POST唔係覆你架喎....!!!
calvincjsa 發表於 2014-12-10 09:53 static/image/common/back.gif
哈.大王你好貪心呀！
依家希望我地18樓既76-FRIENDCLUB可以攪好左先, 屋企希望可以 ENABLED到啦~~{:6_128:}
傻b仔 發表於 2014-12-10 10:53 static/image/common/back.gif
我反而好有問題....就係佢對雙向FH 喇叭.....
我都睇左好耐....點諗都唔明點解要用雙向做FH.....我冇估 ...
這正是分享的精要!
試到好又分享下, 試到吾好又分享下!
沒有100%的對和錯, 這才是交流的正道。
身謝 PAC 師兄招呼小弟家訪示範Atmos 喇叭的擺位。十分配服 PAC 師兄能反覆試不同位置從而達至最佳效果。有他身先士卒，走少好多寃枉路。小弟不材，花了$買器材，但一半 PAC 師兄的效果都冇。
傻b仔 發表於 2014-12-10 11:02 static/image/common/back.gif
我都只係分享下意見JE...
地方細既咪玩5.1.4 LO......做咩要咁樣玩7.1.4.....SB D 聲又係天花落....... ...
自己屋企放幾多隻喇叭呢D好個人既野來喎, 人地喜歡咁玩 7.1.4, 出黎效果又OK, 冇問題丫!!!!
tst123 發表於 2014-12-10 11:05 static/image/common/back.gif
身謝 PAC 師兄招呼小弟家訪示範Atmos 喇叭的擺位。十分配服 PAC 師兄能反覆試不同位置從而達至最佳效果。有 ...
TST兄心明半杯水的學習道理, 讚!
傻b仔 發表於 2014-12-10 10:53 static/image/common/back.gif
我反而好有問題....就係佢對雙向FH 喇叭.....
我都睇左好耐....點諗都唔明點解要用雙向做FH.....我冇估 ...
傻B來架，家庭影音大約由5.1开始普及，至atmos 7.1.4, 所做出既standard 简单d講都係for 錄影/制碟及(懒人)用家以参照“standard”唔會唔識set 位或搞到離哂普(最好auto calibration及一鍵按)。最終都係玩多channels訊號delay,後而制作av 既方向性； 而訊號delay 背後既算式好既pre amp係实時DSP運算，所以Speaker Configuration and manual setting speaker距離及level 係作運算delay effect 之用。
有d人对standard或setup有份執著，咪做跟得夫人，跟咪得law。
但如果你個聆聽空間大细与standard 或reference 唔同，就有所謂“要執執佢”或fine tune.
所以，小的都希望新手從理論到实踐也要掌握到，係香港细既廳仔，我諗大多數一定要執執tune tune。
本帖最後由 wantai288 於 2014-12-10 11:32 編輯
rN2jurB1LRI
其實大家真係唔洗嘈
返屋企睇下呢段,未一清二楚,因為我買左機冇耐去左海運睇電影都好清楚d聲音,點樣走
因為開頭會有隻雀會由左飛去右,我個人覺得FH會冇聲出,如果FH都出聲甘都係鴨毛囉
哈哈
