升呢 - Oppo BDP83 入手!

djaddy

回復  djaddy
Djaddy hing,
Your video not only have an incorrect aspect ratio, but also have an inv ...
pkny 發表於 2010-4-19 04:42

testing now. looks to be working fine.

djaddy

回復  djaddy
djaddy hing,
Correction.  After I checked with the program, it should be uncrop to se ...
pkny 發表於 2010-4-19 09:21

Started at 11:08pm last night. It is now at Pass two: 29.7%.

pkny

回復 715# djaddy

Yes, more passes require a lot more time.  

The first rule of encode: Do not stare at the screen.
The second rule of encode: Do not stare at the screen.
The third rule of encode: Do not stare at the screen.
........................................................................
The tenth rule of encode: Press the button and go to sleep.

djaddy

回復  djaddy

Yes, more passes require a lot more time.   

The first rule of encode: Do n ...
pkny 發表於 2010-4-20 09:12

I dun quite understand the meaning of Pass 1 & Pass 2, etc... Pass is is suppose to be better quality?

pkny

回復 717# djaddy

1 pass = encode 1 time.
2 passes = encode 2 times.  The 2nd time uses the info from the 1st pass.  
and so on….

The quality will be increased with the number of passes.

djaddy

回復  djaddy

1 pass = encode 1 time.
2 passes = encode 2 times.  The 2nd time uses the info from t ...
pkny 發表於 2010-4-20 10:29

I also saw Pass 2 fast. Should I just pick that instead next time?

pkny

I also saw Pass 2 fast. Should I just pick that instead next time?
djaddy 發表於 2010-4-20 10:37

I always set it to Pass2 (medium).  I never use the pass2 fast before.  You can try it yourself.  Depends on the source, you may or may not notice any difference.  

See here:
http://mewiki.project357.com/wiki/X264_Settings#no-8x8dct

preset
Default: medium

Change options to trade off compression efficiency against time. If you specify a preset, the changes it makes will be applied before all other parameters are applied.

Values available: ultrafast, superfast, veryfast, faster, fast, medium, slow, slower, veryslow and placebo.

Recommendation: The slowest you can bear.

djaddy

I always set it to Pass2 (medium).  I never use the pass2 fast before.  You can try it yourself.   ...
pkny 發表於 2010-4-20 12:27

I came home last night & found my PC rebooted itself... I check for the transcoded data, all gone... back to square one!

pkny

回復 721# djaddy

Which version of multiavchd you're using?  Do you get a "download the stable x264" message in the log when you first start up multiavchd?

I check for the transcoded data, all gone... back to square one!

Have you check the temp folder?  

Just try pass1 fast next time.

djaddy

回復  djaddy

Which version of multiavchd you're using?  Do you get a "download the stable x264" me ...
pkny 發表於 2010-4-21 07:26

I am using 3.0. The folder contains nothing