LX59 究竟做唔做到7.1.4?

samuelho12 · 發表於 2016-10-30 22:13

如果想睇到更多76師兄嘅分享，快啲登入成為會員啦！

您需要登入收看或下載更多內容。還未成為會員？成為會員

x

Manual明明有教7.2.4, 但係就只係得9 channels
咁即係點？

wman · 發表於 2016-10-30 22:33

要駁後级才可以

samuelho12 · 發表於 2016-10-30 22:36

wman 發表於 2016-10-30 22:33
要駁後级才可以

有無好建議？睇電影多

wman · 發表於 2016-10-30 22:51

samuelho12 發表於 2016-10-30 22:36
有無好建議？睇電影多

Crown

samuelho12 · 發表於 2016-10-30 22:54

咁買部11 channels好定係後級好？

wman · 發表於 2016-10-30 23:09

samuelho12 發表於 2016-10-30 22:54
咁買部11 channels好定係後級好？

合併機要全推11聲道，或許會有些吃力，師兄如用緊 59 ，買部兩聲道後级推前置便可以。

beechan118 · 發表於 2016-10-30 23:33

wman 發表於 2016-10-30 23:09
合併機要全推11聲道，或許會有些吃力，師兄如用緊 59 ，買部兩聲道後级推前置便可以。 ...

Cannot do in this way, cause the surround back channels can only pre out to external power amp in 7.1.4 layout.

samuelho12 · 發表於 2016-10-30 23:45

beechan118 發表於 2016-10-30 23:33
Cannot do in this way, cause the surround back channels can only pre out to external power amp in ...

so do you mean the front channels cannot pre out to external power amp?

beechan118 · 發表於 2016-10-30 23:54

本帖最後由 beechan118 於 2016-10-30 23:56 編輯

samuelho12 發表於 2016-10-30 23:45
so do you mean the front channels cannot pre out to external power amp?

You can pre out front channels to power amp, but surround back channels needs connect to external power amp as well cause the allocation of built in amp of lx59 are fixed. You cannot assign any other channel to drive surround back channels in 7.1.4 layout even there are idle channels.

samuelho12 · 發表於 2016-10-31 00:13

beechan118 發表於 2016-10-30 23:54
You can pre out front channels to power amp, but surround back channels needs connect to external ...

so the only way to do 7.1.4 is to buy a 11-channel amp?

[AV擴音機] LX59 究竟做唔做到7.1.4?

如果想睇到更多76師兄嘅分享，快啲登入成為會員啦！

相關帖子

76-FC 藍寶石勲章