回復minimoai
對入去插座右面有燈咪冇問題囉
lamborghini436 發表於 2010-10-8 15:26 http://www.post76.com/discuss/images/common/back.gif
返到屋企試試先... 咁Ching有無check過自己個部有無問題呀？
WIRING PROBLEM = 佈線問題
所以香港都癈事入货 ???
Netmans 發表於 2010-10-7 00:43 http://www.post76.com/discuss/images/common/back.gif
呢個reply 可能只係英國其中一個vendor 唔送黎香港的原因.
本帖最後由 Netmans 於 2010-10-8 17:19 編輯
呢個reply 可能只係英國其中一個vendor 唔送黎香港的原因.
liclic 發表於 2010-10-8 16:48 http://www.post76.com/discuss/images/common/back.gif
Ching have PF please check your sn first {:6_141:}
Could be that a wire has come loose or the connection corroded but equally possible that this is a bad batch.
My serial nos are:
O0606C00305WM - shows faulty earth
.............307WM - not yet tested
.............316WM - not yet tested
................
http://www.avforums.com/forums/home-cinema-bargains-discount-codes/1298151-belkin-pureav-home-theater-power-console-pf40-38-87-a.html
I am on my second one, both showing wiring faults when there aren't any. I believe the moulded plug is wired in reverse. Blue to live and brown to neutral. I have contacted Belkin and have level 2 support ringing me within 24hrs. What kind of checks are being carried out in the factory before release?
回復 521# minimoai
睇過呀, 火線 同其它二條線都冇掉轉
回復minimoai
睇過呀, 火線 同其它二條線都冇掉轉
lamborghini436 發表於 2010-10-8 17:09 http://www.post76.com/discuss/images/common/back.gif
咁係咪要個個plug咁試呀？
咁係咪要個個plug咁試呀？
minimoai 發表於 2010-10-8 17:20 http://www.post76.com/discuss/images/common/back.gif
係呀, 個個都試, 就好似買新樓驗樓時都要個個插電位去試.
係呀, 個個都試, 就好似買新樓驗樓時都要個個插電位去試.
ricoy288 發表於 2010-10-8 17:29 http://www.post76.com/discuss/images/common/back.gif
明白，咁Ching 都試過無問題？ ... 放工去買返個他筆先{:6_238:}
明白，咁Ching 都試過無問題？ ... 放工去買返個他筆先
minimoai 發表於 2010-10-8 17:34 http://www.post76.com/discuss/images/common/back.gif
未試呀, 未有時間整佢.
收左機, checked all the outlets: they are wired correctly.
Both the front-plate & the back have no scratch but the surface is a bit dirty & needs cleaning by wet cloth.
Now boiling it with electric fan & air filter machine.{:6_143:}
本帖最後由 Netmans 於 2010-10-8 20:02 編輯
07.08.2010
Peridot says :
Not surprisingly I've confirmed that mine also has the live and neutral incorrectly connected within the moulded plug.
Swapping the wires at the PCB connection within the unit gets the correct indication on the display.
However, as discussed above, this is not correcting the problem and leaves the potential for unsafe fault conditions.
I had intended to cut the moulded plug off anyway and connect the cable via a fused connection unit (spur) so I have returned the internal wiring to its original condition and will keep the unit.
It's very disappointing that a reputable company like Belkin can let this one through and somewhat ironic that they provide a unit with the unusual feature of being able to detect wiring faults and then supply it with a wiring fault
Some pics attached, including one of the display connector which is 'all in one' unfortunately.
http://www.post76.com/discuss/attachments/forumid_5/1010081818600ee618de1e849a.jpg
Internal Wiring Original
http://www.avforums.com/forums/attachments/home-cinema-bargains-discount-codes/193775d1281169029-belkin-pureav-home-theater-power-console-pf40-38-87-internal-wiring-original.jpg
係咪上圖至啱{:6_141:} 下圖係错呢 ?
Internal Wiring Swapped.jpg
http://www.avforums.com/forums/attachments/home-cinema-bargains-discount-codes/193776d1281169045-belkin-pureav-home-theater-power-console-pf40-38-87-internal-wiring-swapped.jpg
Correct Display.jpg
http://www.avforums.com/forums/attachments/home-cinema-bargains-discount-codes/193777d1281169065-belkin-pureav-home-theater-power-console-pf40-38-87-correct-display.jpg
LCD Display Connector.jpg
http://www.avforums.com/forums/attachments/home-cinema-bargains-discount-codes/193778d1281169076-belkin-pureav-home-theater-power-console-pf40-38-87-lcd-display-connector.jpg
