Oppo upgrade 后出事

ngansir

I can repeat the problem, when played "WANTED" uk version bur-ray around 25 minutes, it suddenly no display and sound.  I tried to turn off and on 83SE to start over again but the color displayed wrong from blue to pink on the main manual.

I just guess the problem may come from the latest firmware.......not because of upgrade.

rictsang

The hdmi connectivity between tv and 83 seems have some problems, esp. when I eject the disc, no logo appear and lose connect. I have to insert disc and wait the two machines to connect again. This did not happen before the upgrade.

shing517

而家有代理係旺角喎, 試下拎去俾佢地, 睇下佢地會唔會整~

avbadboy

Is it due to the firmware or hardware problem? The 424 firmware has been launched for a while but before this, there was no feedback of similar problem, until the up-grade exercise this time. I think the agent should find it out and clarify.

andycat

我升了,好似冇事,叫代理send給我的,但好似看AVI有d慢

avbadboy

I tried the Avator b-ray last night for about 10 minutes. No such problem, but noticed that there was no "DTS-MA" shown in the amp display, just "DTS" only. So, I checked the set up and ensure that it was in the "bitstream" mode. But still only "DTS" was shown.

Then I tried the Heckon Lee Bluray, the mode "DTS-HD" was shown in the amp.

Does it mean that the DTS-MA could not be bitstreamed to the amp?  I don't know whether it was the result of the up-grade.

avbadboy

我部機都係, downgrade 咗 0323 ver 都係咁呀..............
hkp1196 發表於 2010-6-4 16:50

By " 都係咁", do you mean you have the same problem as Rictsang c-hing or "DTS-MA" cannot be shown in your amp after up-grade?

avbadboy

So bad, what should we do?

ngansir

I am not "睇 Blu-ray 會間中停一停", my case is the unit hang up!

AntonioII

Don't worry, OPPO will fix all the problem