fuman的新玩具..(更新P.11/P.22/P.25/P.41)

tommychan1021

師兄幾時加相呀!大大大大大大變身.......待續

fuman0123

回復 78# tommychan1021


    你借錢俾我咪可大變身囉

ocicattt

回復  ocicattt
Onkyo 608 + Louis , to improve 力量
Mirage MM6 sub + Louis , to improve 力量
Accupha ...
fuman0123 發表於 2010-8-2 23:41

Thx for ur reply.

The Northwire + Ortofon電源線 tour have very affordable price, but I need to wait for next tour.
I will consider SINE cables, look for 2nd hand first.

For power bar, SA - 5 Silver Cryo does not include cable right? Need to buy a Louis for it?
If I decide to have 瀘波，any cheaper recommendation? (I saw a Monster Power 1000 yesterday ~$1800, good?)

2 more questions:
- My Onkyo 608 power cord is not easily changeable, saw other cHing DIY cut it off and insert a IEC male plug. But doing that, the new power cord will be connected to a portion of "chicken" wire, then to the transformer. Is it better to somehow open up the amp and connect directly inside??
- Some ppl say that amps should connect to Bypass plug of 瀘波 power bar, because it's better. What's wrong with using filtered clean power in amps ??

wiiwiiiloveu

大躍進，正

fuman0123

回復 81# wiiwiiiloveu


    躍進一定有
不過銀包就大縮水

fuman0123

回復 80# ocicattt

Northwire+Ortofon電源線質素ok既，如果你覺得價錢合理都可以放心去買。
另外你話會考慮SINE既線材，不過以二手為先？，但我係市場上好少見到，你亦都可以搜尋一下。
SINE SA-5排插係唔跟電源線，你要另買給它。
如果你想有濾波功能？你見到果隻Monster Power 1000都OK,因為我有兩個朋友都用緊，但你想要再平宜一點可考慮國內大牌子：隆宇既濾波拖排。
另外你話見到某師兄張部Amp既尾部電源線改為可換線的IEC尾插，而這樣做，需要一定知識同技術，我不建議你咁做。
而一般濾波拖排，只適合你插一d細電流既機，例如：CD/DVD/blu-ray/前級or解碼......等等！
而Amp係屬於大電流產品，如插濾波果組，有可能會被cut高cut低，即係削弱了高頻同低頻，除非你用d重型濾波就可以直插濾波果組，
因為它們用大形呃流圈，但往往呢類產品都叫價甚貴，約7000至幾萬不等當然重有貴d啦！
http://www.post76.com/discuss/viewthread.php?tid=27257&from=favorites
想清楚d就睇睇：

ocicattt

回復 83# fuman0123

Thx cHing, the article is very helpful.
So if I buy SINE-SAF-30A or PS Audio Quintet Power Center or cheaper Monster Power 1000, I still need to plug to by-pass for my amps right? (without knowing the technology they use, for this price range I assume they only use 磁環/電容/線圈 filter)

And CD, BD player plug to "dignital";
LCD TV, subwoofer plug to "anolog" ?


If I DIY power cord change for my 608 like this cHing:
http://www.post76.com/discuss/vi ... 4223&highlight=

This method is not hard, but the portion of leftover original cable will waste the flow of strong power from a Louis cord right?

fuman0123

回復 84# ocicattt


    如果你買有濾波作用o既排插？你係仍然要張部Amp插去by-pass果組。你睇過我俾你睇果條Link啦？應該對濾波有更深了解！
其實無須太介懷部Amp係咪一定要經過濾波，因為方間大部份發燒友運用濾波時，都只係用黎接駁CD/DVD/blu-ray/前級同解碼居多，擴音部份極限只插by-pass(包括我在內），尢其後級大多只直駁牆身插座，因為後級電流量大，有部份排插都未能供給足夠電流給它。
另外你如購買有濾波排插？應如何接駁？例子：買以SINE 30A咁計，你應將CD/BD直插Digital而LCD TV/DVD/機頂盒/PS3....等等都插去anolog，最後將Amp直插by-pass，到超低音，呢個好緊要，應將它插去與音響無關的插座上取電，因為超低音內的擴音組件多數係用D類放大有部份甚至更差，失真又大的功率來處理並帶來大量Noise，如插去音響果part取電，會直接影響套音響表現另其衰聲，呢part相信好多人都未必知，係一個玩電o既知心發燒友過料俾我，而咁橋我去買濾波o既老闆都不約而同講出同一番道理。真係不到你不信！
另你提到有師兄用呢個方法換尾插，我個人都有少少保留，咁做係會有改善，但唔夠徹底，始終有個樽頸位，好處就係易整，又可換到線，如可改機箱直接駁到取電位效果會更完美。

kenny238

到去幾時有時間倫到我去你家見色一下.

fuman0123

回復 86# kenny238


    我同你果套差幾班!!!
我預計會加投影，到時請你嚟向你取經