聲畫分家雙 HDMI 輸出 Egreat A11 首批真機到著實測 (#44更新)

michael123

今日終於有時間睇左套4K BD，咁努實講部機個聲畫的確幾OK

而家我只出到4K 24Hz 444 8bit HDR都已經覺得畫面好正

不過今日又比我試到樣野

就係影音分左家都好，只要播套戲時在中間播起然後撳遙控左制由頭開始播後，個影音分家就立即失效

之後熄機再開都無用

又要有第一步從新做起先用到影音分家


希望廠方快點收復個問題

michael123

goldberg0083 發表於 2017-12-10 13:40
個遙控用咗幾日就壞
尋晚用咗一陣 今朝發現燈長著
然後取走遙控電源 跟住就冇反應

朋友，個遙控的確係藍牙/IR

你可以睇下呢個說明

control has 2 modes of operation : IR and bluetooth

Mode switching
The factory default is IR mode, if you need switch to bluetooth mode, please keep pressing the "Stop" key for 5 seconds, the indicator will be flashing with red light and then into blue light, which indicates it has entered into bluetooth mode. If you want to switch back to IR mode, just keep pressing the "Stop" key for 5 seconds again, the indicator will be flashing with blue light and then into red light, thus back to IR mode.

Automatic mode
1.Boot up Egeat Player, confirm that bluetooth is on.
2. Under IR mode, keep pressing "Eject" key for 5 seconds, the indicator will be flashing with red light and then into blue light, after the blue light is off, the remote control has entered into bluetooth connection status.
3. At this moment, the bluetooth remote control will connect Egreat Player automatically, you can operate the player freely within the effective range after successfully connected .

Manual Mode
1. Please switch the remote control to IR mode.
2. Boot up Egreat Player, turn on "Bluetooth" mode.
3. Keep pressing "Eject" key for 5 seconds, until the indicator entered slow flashing status with blue light, the remote control has entered into bluetooth pairing mode.
4. The player will search "AK86" device automatically,choose this player with the up/down key of the remote control, press "OK" key to connect.
5.After successfully connected, the player will show this dievice is connected, the remote control will automatically switch from IR mode to bluetooth mode, indicator will be off.

odinzo

毒以吸 身以痕

siudd

正喎