音響發燒十誡

radhk

◆第五誡 誡用雲石與玻璃

As tested & confirmed by a "high hand". The density of 云石 is too high. Hence, directly placing speakers or equipment will sound worse. However, if you add 腳釘 between the  ...
djaddy 發表於 2009-11-21 09:09

我對speaker可能太輕, 反而直接放黑麻石0係speaker底, 先再放釘腳會好d. 定位會好好多, 易出線條. 另外亦會收低音.

AV原人

超新手問蠢問題:其實點分電源正負極??

djaddy

32# AV原人

djaddy

我對speaker可能太輕, 反而直接放黑麻石0係speaker底, 先再放釘腳會好d. 定位會好好多, 易出線條. 另外亦會收低音.
radhk 發表於 2009-11-21 10:43

rad hing,

which spkrs are u currently using?

On_fire

1# djaddy

Very nice and useful.
thanks

djaddy

Any time la, fire hing.

AV原人

32# AV原人
djaddy 發表於 2009-11-21 20:56

Thanks, djaddy兄, 其實我係想問部機入電源個位得兩個窿咁點分,或者應該係點樣從條電源線上面嗰兩個窿度分正負極

djaddy

37# AV原人

Pls look carefully at the picture below. 部機入電源 = IEC male, when the ground is on top, L = left & N = right. 8字頭 & IEC are similar. For example, for PS3 Slim the L is left & N is on the right. Of cos, there r exceptions. You may need to open up the casing of your amp/ source to check.

For power cables, if connected correctly, L & N should be as the below IEC female. If in debt, use a "他筆" to check.

bb30

多謝師兄分享

djaddy

多謝師兄分享
bb30 發表於 2009-11-30 13:07

You are most welcome.