升呢 - Oppo BDP83 入手!

jasonbiker

No need to 燒碟, use USB drive to upgrade firmware.....
cmsjkung 發表於 2010-1-17 11:39

試咗都係唔得! 有無C hing相助??

djaddy

試咗都係唔得! 有無C hing相助??
jasonbiker 發表於 2010-1-17 17:00

Maybe it's best that you tell us how to tried to update the firmware.

jasonbiker

Maybe it's best that you tell us how to tried to update the firmware.
djaddy 發表於 2010-1-17 20:24

先download個file, 然後見到入面個UPG folder.
之後再入就見到"BDP-83C.bin"個file, 跟著就copy去usb.
是否有出錯?

djaddy

先download個file, 然後見到入面個UPG folder.
之後再入就見到"BDP-83C.bin"個file, 跟著就copy去usb.
是否有出錯?
jasonbiker 發表於 2010-1-17 23:52

Sounds correct. However, what's the msg after you tried to upgrade? It's best u try this: http://www.oppodigital.com/blu-r ... rmware-48-1224.aspx

Firmware Upgrade via a USB Thumb Drive

         1. Click here to download the firmware file BDP-83-48-1224.zip
         2. Insert a USB thumb drive to the computer that stores the downloaded zip file, and unzip the firmware file to the USB drive. Verify that the USB drive now contains a UPG folder, and inside the UPG folder there are files BDP-83.BIN, BDP-83.SIGN, DVD.BIN, DVD430.BIN and MCU83-1.BIN.
         3. Remove the USB drive from the computer.
         4. Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc.  Make sure that there is no other USB device connected to the player.
         5. Insert the USB drive containing the firmware file to a USB port on the player's front or back panel.
         6. The player usually can recognize the firmware file and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via USB.
         7. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
         8. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
         9. In order to complete the firmware upgrade process, the player will turn off automatically. Unplug the USB drive after the player turns itself off.
        10. Turn on the player again after the firmware upgrade process is completed. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please retry the firmware upgrade procedure from step 4 to ensure all parts of the firmware package are installed.
        11. From the setup menu, select Device Setup, Reset Factory Default, and then choose OK to reset the player settings. Enter your customized settings as necessary after resetting.
        12. Congratulations! You have just completed the firmware upgrade. Delete the UPG folder and its content from the USB drive so you do not accidentally install the firmware again.

jasonbiker

509# djaddy
I will try again tonight.
Thanks a lot!

reanult360

good luck!!!! dinner x 3!!!  haha

jasonbiker

要老細睇完電視先有得試! 希望ok啦!

djaddy

要老細睇完電視先有得試! 希望ok啦!
jasonbiker 發表於 2010-1-18 22:20

It's very easy la... good luck!

jasonbiker

It's very easy la... good luck!
djaddy 發表於 2010-1-18 22:32

都係唔得!! 有咩辦法?
到低要點先可能upgrade到??
可能餐晚飯唔慳得!

djaddy

did u unzip the firmware file into UPG folder in your USB?