Onkyo RZ1000 and RZ3000

AAA1

Hope Onkyo MCACC is better than Pioneer with bugs removed
Although many ordinary users are still very satisfied with Pioneer
(Post76 Android 手機版送出)

MDLP

hdconverter 發表於 2016-1-18 14:54
遠嘅唔講，先鋒81之後就用過馬仔前级及nuforce前级，相比之下先鋒真係唔係懶人玩。。 ...

更加唔啱d開口埋就話有bug嘅人玩

AAA1

Pioneer need to switch off and on again for 3D playback
Hope Onkyo has no such problem
Other bugs please see LX59 thread
Actually, the old rz series already have speakers phase matching but just lack freq phase matching per speaker
(Post76 Android 手機版送出)

MDLP

AAA1 發表於 2016-1-18 15:41
Pioneer need to switch off and on again for 3D playback
Hope Onkyo has no such problem
Other bugs pl ...

http://post76.hk/forum.php?mod=v ... id=90973&page=1

淨係自己講Problem solved都講咗兩次
如果有bug就已經solved唔到
另外派IP根本係router設定問題
又唔知NeoX系唔support天花喇叭
又未清楚要有object/channel based選項.......

yuppi

AAA1 發表於 2016-1-18 15:25
Hope Onkyo MCACC is better than Pioneer with bugs removed
Although many ordinary users are still ver ...

無謂將自己既懶惰賴落部機有 bug.....Pioneer 係有 bug, 不過吾係你講果 d 囉⋯⋯

AAA1

I am now running 7.1.4 (9.1.2 setting) and can output neo X from true neo X source
but not when 7.1.2
Both setup use TM speaker
However, when the source is not true neo X, the amp can output neo X!

Pioneer can only output 96khz when set to channel based
It is not  stated in the manual
Of course nobody can find out the answer until I solved it myself
I don't blame them not using Atmos and objected based at that time
(Post76 Android 手機版送出)

AAA1

yuppi 發表於 2016-1-18 17:30
無謂將自己既懶惰賴落部機有 bug.....Pioneer 係有 bug, 不過吾係你講果 d 囉⋯⋯ ...

Maybe you better test it yourself
no bugs just because you don't probably test and verify it
(Post76 Android 手機版送出)

AAA1

maybe u don't have true neo X disc
so no bug
not using Atmos and check 96khz
no bug
no 3d bluray
no bug
no 5 Ghz WiFi
no bug
,.........
(Post76 Android 手機版送出)

MDLP

AAA1 發表於 2016-1-18 17:37
I am now running 7.1.4 (9.1.2 setting) and can output neo X from true neo X source
but not when 7.1. ...

你講來講去都係講隻The Expendables2
隻碟本身係DTS-HD7.1
你在7.1.4setup用NeoX
又點樣由7.1 upmix 去7.1呢？

MDLP

Pioneer can only output 96khz when set to channel based
It is not  stated in the manual
Of course nobody can find out the answer until I solved it myself
I don't blame them not using Atmos and objected based at that time

到今日為止
有邊隻原生object-based碟有24/96
可以比你試到Pioneer出唔到呢？