Pioneer SC-LX59 開箱

MDLP

AAA1 發表於 2015-11-5 21:20
The Android apps does not have MCACC setting
For DTS Neo X, the output is only detected as DTS HD 7. ...

Android 版的McAccPro開關

AAA1

MDLP 發表於 2015-11-7 00:10
Android 版的McAccPro開關

This is sound explorer
No MCACC graph
Cannot see the terminal output from the status viewer
Look like down to 2.1
According to manual
Even upsampling is applicable to 2 channels input only
(Post76 Android 手機版送出)

MDLP

AAA1 發表於 2015-11-7 00:38
This is sound explorer
No MCACC graph
Cannot see the terminal output from the status viewer

ipad 個 mon 大咁多
都祇可看Data及graphic
對McAcc都不能進行setting
setting功能都是在sound explorer進行

唔明有怎麼terminal output要在手機睇到 ?
你可唔可以cap圖講吓點Look like down to 2.1?

升bit無論PCM/DD/DTS都可以
升頻就祇有2Ch PCM先得咁都好合理
另外我想請師兄除P記外
師兄有用過邊個牌子AVamp有得升bit? 升頻 ? 揀filter ?
apps顯示功能又比LX強？

AAA1

The output channel in your status viewer screen shot is blank! With a downslope arrow signifies downmix to fewer channels
From my own test, only 2.1 channels output can go up to > 48KHz
Maybe it is a wrong display from the apps

From Audioholics test, Denon 5200 can output 96KHz in direct mode with all channels under direct mode
http://www.audioholics.com/av-re ... x5200w/measurements

So far, cannot find any other decent AV AMP with this problem!

I also find setting the SOUND RETRIEVER 'ON' resulted in very faint background sound and poorer sound quality

MDLP

個箭咀向下是因為噚晚夜mute咗amp去cap圖
師兄你諗吓都唔合理
點會有部AV amp播5.1/7.1
因為係96/24而會downmix去2.1 ???
SC-LX更加唔會降取樣去48/24 !!!

MDLP

唯一解釋師兄你將個BDP個hdmi輸出搞錯
或者在surround mode 揀錯 stereo 模式

AAA1

I have tried most sound explorer setting
Still in vain
My speaker is 7.1.2 setup
Are you using 5.1 setup?

MDLP

AAA1 發表於 2015-11-7 11:49
I have tried most sound explorer setting
Still in vain
My speaker is 7.1.2 setup

你個speaker system有無搞錯咗？
cap張相嚟睇下呢？
另外個LFE應該係在AVamp上見到係0dB先啱

MDLP

另外你隻乜野title嘅trueHD碟有96/24 ?

AAA1

Problem solved
If I turn the speaker to 5.1 + zone 2/3
I can directly decode DTS MA 96 KHz (Janice live 2014)
If I use 7.1.2 speaker setup, no way
Only ALC listening mode allows DTS HD (48KHz)
96KHz is one step better than 48KHz (~20%)
As LX 59 does not permit manually select speaker output except inside the speaker system Home menu
So any upmixing of channels result in maximum 48KHz

Hope that later firmware can allow choosing speaker channels output (OUT P) and improve 96KHz support