果然係有錢人的玩意。
因為小弟泥緊可能要搬屋
所以到時都會考慮整獨立箱, 想請問下:
1.係咪一條mcb獨立出一隻牆插?
2.係原本電箱落新箱個條電線用邊隻好?
3.新箱mcb A數係咪要夾番舊既?
請指教~~{:6_194:}
the question is to use very balance, toneless wire at front. otherwise it will effect your whole set gear balance and you will regret that you cannot change the inwall wire afterwards. therefore i suggest to use no MSG wire even though it is not high enough for 100k gear. for example, if you are rich, you can use Siltech G7 for in wall wire. but your whole system will be siltech sound and you cannot change it afterward.
so even though pirelli is very cheap but it is balance and toneless. so i also use pirelli 4mm with copper tube from main switch to socket. i also use hubbell for wall socket as it is also tonesless. they will not effect the character of my system. so my most concern is tonelessand balance other than expensive and have character materials.
本帖最後由 yazhou 於 2010-2-1 13:42 編輯
因為小弟泥緊可能要搬屋
所以到時都會考慮整獨立箱, 想請問下:
1.係咪一條mcb獨立出一隻牆插?
2.係原本電箱落新箱個條電線用邊隻好?
3.新箱mcb A數係咪要夾番舊既?
請指教~~{:6_194:} ...
donji 發表於 2010-2-1 10:34 http://www.post76.com/discuss/images/common/back.gif
1.係咪一條mcb獨立出一隻牆插?
係.
2.係原本電箱落新箱個條電線用邊隻好?
英国線,可以既話同D好既.
3.新箱mcb A數係咪要夾番舊既?
mcb A數係夾番線既面積.
實在太瘋狂...{:6_200:}
今日去荃灣問過AEI 2.5mm $209/100m
如果MCB去牆插2.5mm 打双行or單行2.5mm 好
用三上電又如何呀
用三上電又如何呀
poyan 發表於 2010-2-1 20:13 http://www.post76.com/discuss/images/common/back.gif
由電力公司11KV/380V火牛直接獨立供電最好{:6_193:}
你班友。。
實在太瘋狂...{:6_124:}實在太瘋狂...{:6_124:}實在太瘋狂...{:6_124:}
我都想加入呢個瘋狂party, 不過，{:6_123:} 屋企岩岩裝修完。無甘快有批文再搞。{:6_126:}
