請教拉獨立電對AV的提昇大唔大

PP-HK

果然係有錢人的玩意。

donji

因為小弟泥緊可能要搬屋

所以到時都會考慮整獨立箱, 想請問下:

1.係咪一條mcb獨立出一隻牆插?
2.係原本電箱落新箱個條電線用邊隻好?
3.新箱mcb A數係咪要夾番舊既?

請指教~~

matt

the question is to use very balance, toneless wire at front. otherwise it will effect your whole set gear balance and you will regret that you cannot change the inwall wire afterwards. therefore i suggest to use no MSG wire even though it is not high enough for 100k gear. for example, if you are rich, you can use Siltech G7 for in wall wire. but your whole system will be siltech sound and you cannot change it afterward.

matt

so even though pirelli is very cheap but it is balance and toneless. so i also use pirelli 4mm with copper tube from main switch to socket. i also use hubbell for wall socket as it is also tonesless. they will not effect the character of my system. so my most concern is toneless  and balance other than expensive and have character materials.

yazhou 康師父

因為小弟泥緊可能要搬屋

所以到時都會考慮整獨立箱, 想請問下:

1.係咪一條mcb獨立出一隻牆插?
2.係原本電箱落新箱個條電線用邊隻好?
3.新箱mcb A數係咪要夾番舊既?

請指教~~ ...
donji 發表於 2010-2-1 10:34

1.係咪一條mcb獨立出一隻牆插?
係.
2.係原本電箱落新箱個條電線用邊隻好?
英国線,可以既話同D好既.
3.新箱mcb A數係咪要夾番舊既?
mcb A數係夾番線既面積.

davidwh

實在太瘋狂...

yan5137

今日去荃灣問過AEI 2.5mm $209/100m
如果MCB去牆插2.5mm 打双行or單行2.5mm 好

poyan

用三上電又如何呀

CLD3070

用三上電又如何呀
poyan 發表於 2010-2-1 20:13

由電力公司11KV/380V火牛直接獨立供電最好

superdog8092

你班友。。

實在太瘋狂...實在太瘋狂...實在太瘋狂...

我都想加入呢個瘋狂party, 不過， 屋企岩岩裝修完。無甘快有批文再搞。