論壇 › 家庭影院 › LX59 究竟做唔做到7.1.4?

samuelho12 發表於 2016-10-30 22:13

LX59 究竟做唔做到7.1.4?

Manual明明有教7.2.4, 但係就只係得9 channels
咁即係點？

wman 發表於 2016-10-30 22:33

要駁後级才可以

samuelho12 發表於 2016-10-30 22:36

wman 發表於 2016-10-30 22:33 static/image/common/back.gif
要駁後级才可以

有無好建議？睇電影多

wman 發表於 2016-10-30 22:51

samuelho12 發表於 2016-10-30 22:36 static/image/common/back.gif
有無好建議？睇電影多

Crown

samuelho12 發表於 2016-10-30 22:54

咁買部11 channels好 定係後級好？

wman 發表於 2016-10-30 23:09

samuelho12 發表於 2016-10-30 22:54 static/image/common/back.gif
咁買部11 channels好 定係後級好？

合併機要全推11聲道 ，或許會有些吃力 ，師兄如用緊 59 ，買部兩聲道後级推前置便可以 。

beechan118 發表於 2016-10-30 23:33

wman 發表於 2016-10-30 23:09 static/image/common/back.gif
合併機要全推11聲道 ，或許會有些吃力 ，師兄如用緊 59 ，買部兩聲道後级推前置便可以 。 ...

Cannot do in this way, cause the surround back channels can only pre out to external power amp in 7.1.4 layout.

samuelho12 發表於 2016-10-30 23:45

beechan118 發表於 2016-10-30 23:33 static/image/common/back.gif
Cannot do in this way, cause the surround back channels can only pre out to external power amp in...

so do you mean the front channels cannot pre out to external power amp?

beechan118 發表於 2016-10-30 23:54

本帖最後由 beechan118 於 2016-10-30 23:56 編輯

samuelho12 發表於 2016-10-30 23:45 static/image/common/back.gif
so do you mean the front channels cannot pre out to external power amp?

You can pre out front channels to power amp, but surround back channels needs connect to external power amp as well cause the allocation of built in amp of lx59 are fixed. You cannot assign any other channel to drive surround back channels in 7.1.4 layout even there are idle channels.

samuelho12 發表於 2016-10-31 00:13

beechan118 發表於 2016-10-30 23:54 static/image/common/back.gif
You can pre out front channels to power amp, but surround back channels needs connect to external...

so the only way to do 7.1.4 is to buy a 11-channel amp?

查看完整版本: LX59 究竟做唔做到7.1.4?