Thanks, so after activating the ISF mode, you still need to set the settings according to your environment?I have read the instructions on web and it seems quite complicated and i doubt if i can do it.
Thanks, so after activating the ISF mode, you still need to set the settings according to your environment?I have read the instructions on web and it seems quite complicated and i doubt if i can do...
ay123 發表於 2009-9-16 22:17 http://www.post76.com/discuss/images/common/back.gif
Every panel may have slightly different settings to achieve the perfect picture but there are a lot of reference settings posted by others on the ControlCal forum. That should be a good starting point. But the real benefit is having different customized settings for different input. For example, you might not need any noise filter for Blu-Ray but definitely need it for other analog input. So you will have different settings for different input. You can only do this with the ISF memory.
DIY calibration is also fun especially with the 500A. I've learnt a lot these past few days about TV calibration and I am still learning.
Tinghai兄,我都買咗controlcal但activate唔到,可唁可以指教一下,已經email咗turbe但未覆{:1_260:}
Tinghai兄,我都買咗controlcal但activate唔到,可唁可以指教一下,已經email咗turbe但未覆{:1_260:}
bananaman 發表於 2009-10-18 15:45 http://www.post76.com/discuss/images/common/back.gif
我都係activate 唔到......今年年頭已俾咗 donation!!{:1_255:}
見到 isf mode 我仲以為自己眼花添。{:6_168:}
都唔明點解我地亞洲 500A 冇 isf mode 既 {:6_194:}
ok咗啦!!張activate v1.0個file連兩個text file copy入去controlcal個directory然後run activate.exe再輸入個id就ok
我都係activate 唔到......今年年頭已俾咗 donation!!{:1_255:}
sunnyt 發表於 2009-10-18 16:24 http://www.post76.com/discuss/images/common/back.gif
如果你部PC係行中文Windows 係要有個特別方法同License file 你購買時最好講低部PC 既Config. 我之前同Turbe 來回十幾封email至 activate 到
阿二同我講中間位有即換，好彩我一點都冇{:6_184:},如果唔係不如e世都唔好check佢啦{:6_188:}
買500M LA@O@
