Viablue一家親之NF-S1 Silver Quattro RCA

ykluk · 發表於 2011-11-23 00:38

如果想睇到更多76師兄嘅分享，快啲登入成為會員啦！

您需要登入收看或下載更多內容。還未成為會員？成為會員

x

話說小弟之前喺德國收咗個好重既箱返嚟, 裡面一堆嘢宜家先慢慢去清貨:

http://www.post76.com/discuss/viewthread.php?tid=90734

今次係既主角係Viablue NF-S1 Silver Quattro 線, 去相

Viablue T6S RCA plugs

先去外皮

唔要張白紙, 見網

將網扭成線

再將錫箔紙連線一齊扭

裡面仲有一層網, 其實唔使將全部網都要做成線, 總之包到個線芯做成負極

中間2條線芯就做正

開線芯

入落rca頭, 用六角匙扭實就得, 呢隻唔使焊

就係咁完成一個頭

同場加演, 扮原廠線!!

材料多咗蛇網同filter

好似好多料咁

先入蛇網, 用熱縮膠定位

入咗filter先再開線

比張清楚啲既rca頭比大家睇

再入個rca外殼

同之前一樣, 入好rca頭再套返外殼上去

咁就完成咗自製既原廠線喇

用後報告:

宜家小弟部audio-gd nbf-12全部線都係viablue出品, x40 pc, nf-75同軸, nf-s1 rca, KR-2 Silver USB同埋化震腳, 真係同廠一家親!!

比起之前小弟diy嗰條pa-02, nf-s1相對較為夾宜家套架生同耳仔, 分析力同音場闊度都有所提升, 可幸既係連人聲結象都好好, 都聽得幾清楚喺我前額出聲, 而樂器定位亦相當不俗!!

而加咗filter既扮原廠線相對無filter既就較為靜, 喺未煲好既情況下雜音都唔算多, 煲多百幾粒鐘應該會有更好既表現, 啱晒小弟鍾意聽jazz, bossa nova同有少少追中高音分析力既喜好!!

多謝觀看!!

ykluk · 發表於 2011-11-23 00:39

本帖最後由 ykluk 於 2011-11-23 00:43 編輯

比多啲資料大家參考下條線既用料:

NF-S1 Silver Quattro Analogue
The balanced construction has two inner tin-plated 0.5 mm2 copper wires with 19 individual strands (19 x 0.185 mm) and polyethylene insulation. Two twisted PVC insulators are used as fillers. The Quattro Silver Shield multiple screening has two ALU-PETP films and two silver-plated spiral wrap screens running in opposite directions with fine 0.15 mm strands. There is a felt layer between the screen and the outer cladding to protect the outer silver screen. NF-S1 has an outside diameter of 8 mm.

T6S RCA plugs
ViaBlue™ T6s rca plugs have contact pins made of bronze which are 24 carat gold-plated. The shells are made of aluminum. Cables up to 9.5 mm diameters can be installed. All connectors of the T6s series are supplied including two diameter decreasers. Those diameter decreasers make an assembly of cables with small and big diameter possible and grant a firm strain relief.
Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser cables with diameters from 7.5 mm to 9.5 mm can be installed.