MS 頭，我愛你！

wally

今晚小弟第一次用MS 頭做條 NeoTech 電源線。平時要用好多時間去將d線轉身，而這個頭輕鬆直入，而且d screw 位全部在食力位，唔似mk咁入得幾好都好，個殼都係會爆出黎。雖然貴過mk成2舊，但似乎值得 MK 頭，可能要同你永別啦

KING

等睇你D相喎!

wally

回復 2# KING


King sir, 你用得重多啦     
Anyway, 而家條線落咗sub 仔試緊。無失望。明天再post 相啦。

KING

回復  KING


King sir, 你用得重多啦     
Anyway, 而家條線落咗sub 仔試緊。無失望。明天再pos ...
wally 發表於 2011-11-6 00:52

    MS頭我都未用過喎!MK頭就用紅,白兩隻咁大把咋!

avlam

今晚小弟第一次用MS 頭做條 NeoTech 電源線。平時要用好多時間去將d線轉身，而這個頭輕鬆直入，而且d screw ...
wally 發表於 2011-11-6 00:41

  唔用古河嘅首選!!!

chakat

Ching,我也剛剛用MS頭整咗兩條。。。一條X40, 一條6n4030，都OK，雖然因為首次整咁粗嘅線，第一條到用咗大半日，因為很多地方唔明白，但第二條就快好多了，所以想今晚完成另一條X40，心想很多師兄也有用MK，可以試下啊!?點知原來用MK頭和瑞士尾對新仔真係好難處理的，搞咗成晚，手指勁痛。。。所以決定放棄星期一出去再買多套MS＋320i算了。。。。。

depeche_lam

Ching,我也剛剛用MS頭整咗兩條。。。一條X40, 一條6n4030，都OK，雖然因為首次整咁粗嘅線，第一條到用咗大 ...
chakat 發表於 2011-11-6 02:52

師兄唔好咁快就放棄..試吓好似我咁cut咗啲格片睇吓會唔會仔啲http://www.post76.com/discuss/vi ... p;extra=&page=3

KING

Ching,我也剛剛用MS頭整咗兩條。。。一條X40, 一條6n4030，都OK，雖然因為首次整咁粗嘅線，第一條到用咗大 ...
chakat 發表於 2011-11-6 02:52

    師兄!功多自然藝熟,唔好咁早講放棄!
等睇你表演呀!

wally

等睇你D相喎!
KING 發表於 2011-11-6 00:42

班門弄斧喇, King Sir. 見笑, 見笑.

Note that the white one is just the 熱縮膠

Pull everything out, screw that in:


Put everything back in:


Although the cables are still a bit bounce back, but as mentioned, since there're 2 screws to hold the socket shell, one next to the Earth and one next to the Live, so it can hold the whole thing very tight.

Also, the material if the legs are very good. So, that's why I was saying, the time spent on the MK + the quality of the plug that you get, $200 more may be worth it.

KING

班門弄斧喇, King Sir. 見笑, 見笑.

Note that the white one is just the 熱縮膠  

Pull eve ...
wally 發表於 2011-11-6 15:14

    Good Job!