可以幫助 AV amp 散熱問題

danny

原帖由 chhanthony 於 2008-10-4 01:17 PM 發表



可唔可以詳細一點
小弟對電不認識
O係Amp後面攞電, 要插O係邊度呢?

Thanks danny兄

amp後面有個兩腳電插座輸出220V。(你買一條兩腳插頭連電線，插頭要同amp輸出插座配合，然後將火牛條電線改為兩腳插頭電線。)
電線可以係鴨寮街有得，大約10元1條。(永盛好似有，如無就要揾吓第二間)
amp後面有個3.5mm腳電插座輸出12V，(呢個做法就唔需要火牛，由部amp直接输出12V電。)

babuwa

may be use external socket better since it will degrade the amp performance.

I'm also 6003 user, when I select HDMI at input menu rather than auto(or change AH to HD on display by pressing A/D button on remote control), the sound have significant improvement. danny, have you try it?

radhk

我部amp之前都加0左把風扇. 總之坐0係皇帝位聽唔到有聲就可以. Smilies005

無錯部機有heatsink, 不過成日覺得d零件長時間0係高溫下運作, 會易壞d. (我部amp係長開), 所以都係加把風扇.

http://hk.myblog.yahoo.com/ck_lee_hk/article?mid=4173

ming

買把風扇吹住重方便

小瑟

部 AMP真係勁到咁??

radhk

原帖由 ming 於 2008-10-6 12:54 發表
買把風扇吹住重方便

風扇會吹晒d麈入部機到嘛. :o

danny

原帖由 babuwa 於 2008-10-6 09:41 AM 發表
may be use external socket better since it will degrade the amp performance.

I'm also 6003 user, when I select HDMI at input menu rather than auto(or change AH to HD on display by pressing A/D button ...

babuwa兄，
請問可否用中文，我英文唔店，請見亮！
thx,

babuwa

Sorry, I can't type chinese, please see below picture

1. enter function input setup
2. change the mode from Auto to HDMI for your HDMI source
3. exit the menu

danny

babuwa兄，
我推測你是否想問，用HDMI 或 同軸输入方法？
1.如用HDMI输入，將DVD hdmi 输出線插 入amp 输入後面(有寫住DVD果組)。
2.mode from Auto。 (yes)
3.你要在 amp 或瑤控，錦返auto果制，部amp表板燈著住auto，部amp就會自己認訊號。
4.如你用光千或同軸線，你要在digital個行输入番你條線放係第幾組(1-5)。
希望無古錯可以幫到你？
如真係唔明可PM比我留電話祥談，大家然究吓？

babuwa

Sorry. I'm not asking a question, I'm Provide a tips that can improve audio performance of SR-6003.

Just follow the picture, change those Auto to HDMI, when you using HDMI to listen music or watch movie, you can found significant improvement.