Neotech NEI 3001 XLR to RCA (DAC magic 100%之實力)

dyna1000 · 發表於 2011-10-15 18:15

so professional

pandakelvin · 發表於 2011-10-17 23:42

Just search the internet and there is a schematic shows as following. What is the right or "good sound' connection?

Phonitor XLR pin config.jpg

edison133 · 發表於 2011-10-30 15:47

Just search the internet and there is a schematic shows as following. What is the right or "good so ...
pandakelvin 發表於 2011-10-17 23:42

For the Dac magic balanced opamp output, your connection will be short the netgetive opamp output.
It will make the power unbalanced!
So, that's why I am not connect the natgetive output to the GND.

shalala · 發表於 2012-2-21 15:28

請問......
樓主現在             source (DAC) XLR > RCA (AMP)
1號位焊銅網及地線, 2號位焊正線 XLR  > RCA (正 , 地 , 無焊網)

如果我係             source (DAC) RCA > XLR (AMP)
   應該,  正 , 地+網  RCA >  1號位地線 , 2號位焊正線 XLR (無焊網)

這樣調轉也可以?

thx

shalala · 發表於 2012-2-22 09:59

tested! noise now~~thx!

edison133 · 發表於 2012-2-22 10:23

RCA to XLR 係有問題架吾可以咁用, 因為XLR 接收級用個差動放大或輸入牛!
如只入單邊信號會有noise 架!

shalala · 發表於 2012-2-22 10:47

本帖最後由 shalala 於 2012-2-22 10:48 編輯

sorry , now is no noise

but .....will cause any damage?

shalala · 發表於 2012-2-22 11:05

attached jpg to show ......:>

edison133 · 發表於 2012-2-22 11:28

sorry , now is no noise

but .....will cause any damage?
shalala 發表於 2012-2-22 10:47

你個接法就要將-VE接地了

edison133 · 發表於 2012-2-22 11:30

attached jpg to show ......:>
shalala 發表於 2012-2-22 11:05

因為Ipod行電池直流電所以無交流聲!

[教學] Neotech NEI 3001 XLR to RCA (DAC magic 100%之實力)

76-FC 藍寶石勲章