IQ3想掛上牆做front height, 有冇辦法?

joelkw

對IQ3依家做緊前置, 因計劃升級Q700, 所以想升佢上去掛牆做front height, 但音箱形狀太騎呢, 搵唔倒fit佢o既掛架, 有請各位高手ching幫忙度下點樣可以掛上去~~

正面


側面


Top view


背面及Close up

inagawa

做front height 太大隻啦, 又冇0孔......

放左佢買隻micropod 啦.

philippe

本人用micropod se做環繞唔掂，可能不識合置高！

joelkw

咁又唔駛買過, 依家後置用緊kef 2005 蛋仔, 可以轉佢上黎做front height都得 (後置換os3), 不過諗住對如果iq3上倒去, kef 2005 蛋仔可以擺入房, o既然係咁... 惟有蛋仔做front height啦, 重方便有哂掛座同, 2口鋼牙攪惦~~
不過iq3入房又好似大得滯~~~ iq3可以放倒幾多?

wally

use those mount that you can sit the speaker on it, don't think you can mount it on the wall directly.

i did also tried micropod... no no.

joelkw

use those mount that you can sit the speaker on it, don't think you can mount it on the wall directl ...
wally 發表於 2011-6-14 11:28

就係咁先煩~~ 冇孔但真係唔舍得鑽佢~~

wally

回復 6# joelkw

no la, don't drill the speaker.

SSP has a lot of speaker mounts, get those Boss speaker mounts should be able to hold yours.

inagawa

回復 4# joelkw


    $1500 左右喇.

joelkw

回復  joelkw

no la, don't drill the speaker.

SSP has a lot of speaker mounts, get those Boss spea ...
wally 發表於 2011-6-14 11:44

有睇過, 有d 係唔駛上鏍絲, 用個大夾加防滑膠邊左右夾, 但都係for 方形, 所以擔心夾唔實, 因為iq3係孤形邊, 接觸面少左.

a974005

一左一右整2個九臂架,上面放塊木板(同iq3差不多大小),再放對iq3上去,想用釘腳都得