2067 5.1+front presence問題

rickychan1005

各位師兄，我用5.1+front presence, 前speaker 用pre out 去int.amp ,front pre sence 插2067,但set唔到，前speaker無聲，唔用front pre sence，前speaker就正常，究竟應該點插？睇說明書power assignment 就好似只可以power amp 行pre sence，front一定要插機，究竟應該點?

mr.condom

Do you have use "Manual setting".....set7.1 speakers

rickychan1005

Yes,but the poweramp assignment can not change

YSIULUN

CHING你FRONT係咪用BI-AMP啊, 如果唔係應該POWER AMP ASSIGN揀 7CH NORMAL,
我就FRONT用BI-AMP, FPR就PRE OUT 去POWER AMP, POWER AMP ASSIGN 揀
5CH BI-AMP+FPR

rickychan1005

i use pre out to int amp for the front speaker, and i also want to add the front presence speaker, and i tried 5.1 and 7.1 also not ok~~front speaker is not working,
that mean
av amp ------pre out(FR,FL)-----int amp-----frontR,L
av amp------ suround R,L ,center
is ok.

but not ok with the front presence RL plug in the av amp~

alex318tik

咁2067如要9.2是否一定要加后級?可有推介?因會買多set MX 5.1用THX師兄

mr.condom

my setting:av amp>>>>zone2/zone3/FL Presence做Front Height
               av amp>>>>Front & Centre照舊
               av amp>>>>Surround做後surround
用YPAO run 下,應該出哂7個speakers.

JKC710

好似無辦法, 因為2067同3067既FRONT同PRESENCE都係用同一組PRE-OUT, 要上到Z系有PRE-AMP MODE既機先可以將全部聲道PRE-OUT去POWER AMP~

rickychan1005

that mean int amp or front prescene need select 1 from 2 ....that's so stupid!!!!!

JKC710

that mean int amp or front prescene need select 1 from 2 ....that's so stupid!!!!!
rickychan1005 發表於 2011-6-10 00:12

應該係喇~~ 如果XX67都有呢個FUNCTION既, 咁Z系既吸引力(PRE-AMP MODE)真係少左好多~