AV AMP 應該 set 6ohms 定 8ohms?

inagawa

OH .I SEE.

THANKS

waileung1117

真的嗎？
咁我番屋企set回8ohm先。

發送自我的 HTC Incredible S 大板凳

mr.condom

回復 9# MSZ


    Really C Hing...I set back to 8 ohm sin

nfsfans

以前玩汽車Hi-Fi時, 通常都係行8 ohms會細Power D, 不過就冇咁失真 (THD)
4/6 ohms 通常都係可以大D Power, 但失真就多好多~~
e.g. 如果個Amp用4 ohms speaker Power 有 100w, 用8 ohms Speaker 就會得番50W~ 雖然Power 少左, 不過失真就會低好多~

P.S. 唔知啱唔啱, 請指點~~

CrazyBull

通常set係行8 ohms

76-Ryu

我比較相信鬼佬, 較6 ohm嘅話會大幅減弱power output, 所以set番去8 ohm會好啲:



...
MSZ 發表於 2011-4-11 11:49

Good source of information there, chings should follow this advise.

The 4/6 ohm setting on most modern AV receivers are there for liability purposes and often delivers much less power to the speakers. Even if your speakers are 4/6 ohm, try them out with the 8 ohm setting first, only use 4/6 ohm setting when your amp goes into protection mode when driving your speakers.

極地雪

請問yamaha rx-2067 可以係邊度set 到喇叭既ohms....
我係manual 度搵唔到

happypanda1666

請問yamaha rx-2067 可以係邊度set 到喇叭既ohms....
我係manual 度搵唔到
極地雪 發表於 2011-4-12 14:37

Page 21, 22

極地雪

Page 21, 22
happypanda1666 發表於 2011-4-12 16:14

終於見到喇....原來係要係呢度set - - 真係唔講唔知...

thanks ching