|
|
樓主 |
發表於 2009-6-22 22:10
|
顯示全部樓層
ONKYO Thai 為用戶提供 Firmware 大更新!!!!
http://www.onkyothai.com/index.php?mo=10&art=280007
1.TX-NR906
Main Version 1.06
Model TX-NR906
FW Main
Ver. 106
Ver. Display 9 1.06/09116B
To display Version, press DISPLAY+STANDBY
Remarks: For unstable output based on 576i input (PAL), this FW and complicated hardware modification are necessary.
HDMI Version 1.00
Model TX-NR906
FW HDMI
Ver. 100
Ver. Display 1.00/08627A
To display Version, press "Display"+"Standby" --> "Tone+" 4 times
Remarks: HDMI control microprocessor which supports:
HDMI Ver.1.3a RX-TX Repeater
DeepColor36bit, 30bit
xvYCC (Profile0)
High Bit Rate Audio
DSD
PC Timing (WUXGA)
2.TX-SR876
Main Version 1.06
Model TX-SR876
FW Main
Ver. 106
Ver. Display 87 1.05/09116B
To display Version, press DISPLAY+STANDBY
Remarks: For unstable output based on 576i input (PAL), this FW and complicated hardware modification are necessary.
HDMI Version 1.00
Model TX-SR876
FW HDMI
Ver. 100
Ver. Display 1.00/08627A
To display Version, press "Display"+"Standby" --> "Tone+" 4 times
Remarks: HDMI control microprocessor which supports:
HDMI Ver.1.3a RX-TX Repeater
DeepColor36bit, 30bit
xvYCC (Profile0)
High Bit Rate Audio
DSD
PC Timing (WUXGA)
3.TX-SR806
Main Version 1.05
Model TX-SR806
FW Main
Ver. 105
Ver. Display 1.05/08X20A
To display Version, press DISPLAY+STANDBY
Remarks: Change in factory work
4.TX-SR706
Main Version 1.05
Model TX-SR706
FW Main
Ver. 105
Ver. Display 1.05/08X20A
To display Version, press DISPLAY+STANDBY
Remarks: Change in factory work
5.TX-SR606
Main Version 1.03
Model TX-SR606
FW Main
Ver. 103
Ver. Display 1.03/08630A
To display Version, press DISPLAY + ON/STANDBY
Remarks: Mainly small bug fixes)
While CEC's PowerControl was enabled, APOWER would still remain high even Protection mode was activated.
When TV was turned on by Remote Control with CEC ready in 606 and Viera PZ800, the volume of 606 could not be changed by Remote Controller.
6.TX-NR905
Main Version 1.09
Model TX-NR905
FW Main
Ver. 109
Ver. Display 9 1.09/08414A
To display Version, press [DISPLAY]+[STANDBY/ON]
Remarks: This version is effective only for DTR-8.8 with speaker settings set by AudysseyPro.
HDMI Version 1.02 (Special)
Model TX-NR905
FW HDMI
Ver. 102
Ver. Display 1.02/08528A
To display Version, press [Display]+[Standby] and then [Tone+] twice (605/5.8/705/6.8)
[Display]+[Standby] and then [Tone+] 4 times (805/7.8/875/9.8)
Remarks: With HDMI connection between TV, AV Receiver, and Source device,
sound could be interrupted when TV is off.
This depends on the connected devices and is not a real problem but can be prevented by loading this new FW.
7.TX-SR875
Main Version 1.09
Model TX-SR875
FW Main
Ver. 109
Ver. Display 87 1.09/08Y19A
To display Version, press [DISPLAY]+[STANDBY/ON]
Remarks: slightly longer muting time as a measure against noise in Blu-ray disc "Golden Compass"
This is really rare case.
Update should be done only for Blu-ray disc "Golden Compass".
HDMI Version 1.02 (Special )
Model TX-SR875
FW HDMI
Ver. 102
Ver. Display 1.02/08528A
To display Version, press [Display]+[Standby] and then [Tone+] twice (605/5.8/705/6.8)
[Display]+[Standby] and then [Tone+] 4 times (805/7.8/875/9.8)
Remarks: With HDMI connection between TV, AV Receiver, and Source device,
sound could be interrupted when TV is off.
This depends on the connected devices and is not a real problem but can be prevented by loading this new FW.
8.TX-SR805
Main Version 1.08
Model TX-SR805
FW Main
Ver. 108
Ver. Display 8 1.08/08223A
To display Version, press [DISPLAY]+[STANDBY]
Remarks: When powered on just after upgrade, "E2PROM ERROR" will be shown.
In this case, unplug the AC cord and plug it again.
S/N Marking: "S"
Service Bulletin No.08001
HDMI Version 1.02 (Special )
Model TX-SR805
FW HDMI
Ver. 102
Ver. Display 1.02/08528A
To display Version, press [Display]+[Standby] and then [Tone+] twice (605/5.8/705/6.8)
[Display]+[Standby] and then [Tone+] 4 times (805/7.8/875/9.8)
Remarks: This is not applied to Production.
With HDMI connection between TV, AV Receiver, and Source device,
sound could be interrupted when TV is off.
This depends on the connected devices and is not a real problem but can be prevented by loading this new FW.
9.TX-SR705
Main Version 1.06
Model TX-SR705
FW Main
Ver. 106
Ver. Display 106Main1.06/08223A
To display Version, press [DISPLAY]+[STANDBY/ON]
Remarks: When powered on just after upgrade, "E2PROM ERROR" will be shown.
In this case, unplug the AC cord and plug it again.
S/N Marking: "S"
Service Bulletin No.08001
HDMI Version 1.02 (Special)
Model TX-SR705
FW HDMI
Ver. 102
Ver. Display 1.02/08528A
To display Version, press [Display]+[Standby] and then [Tone+] twice (605/5.8/705/6.8)
[Display]+[Standby] and then [Tone+] 4 times (805/7.8/875/9.8)
Remarks: This is not applied to Production.
With HDMI connection between TV, AV Receiver, and Source device,
sound could be interrupted when TV is off.
This depends on the connected devices and is not a real problem but can be prevented by loading this new FW.
10.TX-SR605
Main Version 1.05
Model TX-SR605
FW Main
Ver. 105
Ver. Display Main.1.05/08225A
To display Version, press [DISPLAY]+[STANDBY/ON]
Remarks: When powered on just after upgrade, "E2PROM ERROR" will be shown.
In this case, unplug the AC cord and plug it again.
S/N Marking: "S"
Service Bulletin No.08001
HDMI Version 1.02 (Special )
Model TX-SR605
FW HDMI
Ver. 102
Ver. Display 1.02/08528A
To display Version, press [Display]+[Standby] and then [Tone+] twice (605/5.8/705/6.8)
[Display]+[Standby] and then [Tone+] 4 times (805/7.8/875/9.8)
Remarks: This is not applied to Production.
With HDMI connection between TV, AV Receiver, and Source device,
sound could be interrupted when TV is off.
This depends on the connected devices and is not a real problem but can be prevented by loading this new FW. |
|
[複製鏈接]
發表於 2009-1-27 12:50
我用806有得updata嗎?
