LX-83 setting

鐵心心 · 發表於 2011-2-9 21:21

回復 yuppi

按 "PLAY" 掣係開 phase control喎?
giralda 發表於 2011-2-9 21:18

你行緊AUTO MODE定PURE MODE定Direct MODE??(83好似仲有個OTIC.....咩MODE)

giralda · 發表於 2011-2-9 21:22

回復 11# 鐵心心

direct mode

鐵心心 · 發表於 2011-2-9 21:24

回復鐵心心

direct mode
giralda 發表於 2011-2-9 21:22

direct mode開到EQ但開不到MCACC

giralda · 發表於 2011-2-9 21:34

回復 13# 鐵心心

但我開EQ時,部機前面棧燈會著喎?
2011-02-09 21.30.19.jpg

yuppi · 發表於 2011-2-9 21:37

For LX83, MCACC = Auto EQ.....

yuppi · 發表於 2011-2-9 21:38

本帖最後由 yuppi 於 2011-2-9 21:43 編輯

http://www.pioneer.eu/files/eur/MCACC_PQLS_phasecontrol/top.swf

MCACC stands for Multi-Channel Acoustic Calibration System.

It's an automatic sound field adjustment system that enables you to precision-tune your system to your living room, just like a sound professional, but with minimum effort.

A microphone monitors the sound environment and an equaliser (either 5 or 9-band, depending on which model of amplifier you have) optimally adjusts the sound parameters.

The result sounds like a professional recording engineer has fine-tuned your amplifier or home cinema system.

MCACC was created as a joint effort between Pioneer and professional sound engineers at AIR Studios; it's unique to Pioneer, so you won't find it on any other products.

giralda · 發表於 2011-2-9 21:42

回復 16# yuppi
即係話用完mcacc setting之後,就唔好用direct mode?

yuppi · 發表於 2011-2-9 21:49

回復 yuppi
即係話用完mcacc setting之後,就唔好用direct mode?
giralda 發表於 2011-2-9 21:42

可以, 不過如果想用 MCACC 就吾可以用 PURE DIRECT MODE.

鐵心心 · 發表於 2011-2-9 21:54

用AUTO MODE咪好囉{:4_55:}

giralda · 發表於 2011-2-9 21:57

回復 19# 鐵心心

等我再鑽研多一排先

[請教] LX-83 setting

76 榮譽版主勲章

76 榮譽貢獻勲章

76星級影音勲章

76 榮譽VIP勲章

76 精選榮譽會員勲章

76-FC 藍寶石勲章