Belkin PureAV PF50 & PF40 (英式) 收到了

avmaster22

回復 610# koo9726

如果買PF40最好問下間shop，問下佢Ｄ貨源點來，睇佢點答再作決定；同埋可以上avsforum刨下文，比較穩陣。

koo9726

回復  koo9726

如果買PF40最好問下間shop，問下佢Ｄ貨源點來，睇佢點答再作決定；同埋可以上avsforum刨下 ...
avmaster22 發表於 2010-10-10 02:07

    多謝師兄資料提供 ,咁我就上去睇睇先

lamborghini436

回復 612# koo9726


    又或者可以去 what hi fi.com 度睇下d人平價

koo9726

pf40好似加左價http://www.digital-fusion.co.uk/ ... Console-9-Socket-3m
http://www.amazon.co.uk/Belkin-P ... 86679912&sr=8-2

Netmans

pf40好似加左價
koo9726 發表於 2010-10-10 11:05

http://www.post76.com/discuss/viewthread.php?tid=49437&extra=page%3D1&page=58

ching 重有貨  under  Belkin PureAV Home Theater Power Console PF40 £38.87

http://www.h2oit.com/productdeta ... UK3M&IID=508596



Eve msg : 6/10/10 = pf40 全英國只有10部。唔買走寶  (我估唔係唔係咪 d  shop 想清貨)


注意 liclic ching 收到 msg :

再有 update from stuff-uk.net 個faulty 係 wiring problem, 我都有問佢如果有新貨到, 問佢會唔會送HK.

"There is a batch of stock in the UK that has a wiring problem in the plug for this unit.

Belkin are replacing any faulty units but the costs of shipping it to and from Hong Kong if it was faulty would be just too great."
http://www.post76.com/discuss/vi ... ;extra=&page=10


自已計數搏唔搏啦

koo9726

ching 重有貨  under  Belkin PureAV Home Theater Power Console PF40 £38.87





Eve msg : 6/10/ ...
Netmans 發表於 2010-10-10 11:12

    真係人生交叉點

edhuen

Pf40- less than 1250, really high c/p rate, looking for more improvement after heating up

koo9726

Pf40- less than 1250, really high c/p rate, looking for more improvement after heating up
edhuen 發表於 2010-10-10 11:30

    都好都好

CKKeung

I discover that my PF40 has a defect!!!  
It cannot indicate the amount of current used (it's always 0.0).
Otherwise it functions OK.

I have carefully read this whole discussion & some overseas forum discussion.
I check the Belkin UK official website & find that PFX0 series is not there.
The previous price of PF40 in UK without shipping cost to HK is already >HK$2000.

Therefore I think these cheap PF40 that we bought are the remaining stock after discontinuation.

The reason of discontinuation may be the poor QC of the Chinese OEM factory causing various small defects (such as scratches, dirtiness, wiring problem...etc).

minimoai

I discover that my PF40 has a defect!!!   
It cannot indicate the amount of current used (i ...
CKKeung 發表於 2010-10-10 12:25

How many electronic stuff you plug into PF40? I found the amount of current being used is very small ..... most of the time is less than 2

Have you tried Hair Dryer? I tried and the amount of current used can be up to 5 ....

Hope it is normal