These connect with RCA type cables
from the line-level outputs of your
receiver or preamp. Here are two
examples:
If your processor or receiver has a
single subwoofer output, connect it
to the subwoofer’s left input jack (see
page 11). There is no need to use the
subwoofer’s right input jack.
If your processor does not have a
subwoofer output, use “Y” adapters at
the processor outputs (see page 12). In
this way, you can send the processor’s
full-range output signals to your main
amplifier and to the subwoofer at the
same time.