已入手Panasonic 42" V20H (圖在P.3)

lgvincent

What is worst, after SOGO showroom, I went to Broadway in basement of Hang Lung Centre, and saw Samsung LED 8000 series demo Avatar Bluray.

Wah!!! It is like I just had a Lasik operation.

plnl88

I  have similar experience at Panasonic SOGO showroom.
The older 50" V10 seems better than the new 5 ...
CKKeung 發表於 2010-7-1 09:19

唔通 SOGO Showroom 班員工唔識 set V20H?
無乜理由　Pasnasonic 倒自己米，新一代 Panel 重差左格。
個 Spec V20 好過 V10 幾多下架啵！

DNA

唔通 SOGO Showroom 班員工唔識 set V20H?
無乜理由　Pasnasonic 倒自己米，新一代 Panel 重差左格。
個 S ...
plnl88 發表於 2010-7-1 17:46

可能想清左舊貨先

lgvincent

回復 82# plnl88


I think the Spec is sometimes deceiving. Even last year, when 50S10 first came out, its Spec was better than 50PZ850. In reality  (in my opinion) PZ850 was better than S10.

I don't think it was a matter of setting by Sales staff, because I saw both were using the same setting.

iamusy

同意樓上 CHing 所說, 的 Sales 真係無物料到, Spec 都背得唔清楚, 點可以靠佢地調個好少少Setting. Default value唔可信.

plnl88

回復  plnl88


I think the Spec is sometimes deceiving. Even last year, when 50S10 first came out,  ...
lgvincent 發表於 2010-7-1 18:37

但歐洲 AVForums 已出左 review 話 13th generation neopdp panel 比 上一代好左好多。
無乜理由一個咁客觀網站都錯架？
http://www.avforums.com/review/P ... -Plasma-Review.html

G20 所用的 infinite black panel 正是亞洲版 (except Japan) V20H 所用的 panel
http://www.avforums.com/review/P ... ma-HDTV-Review.html

ajnakata

但歐洲 AVForums 已出左 review 話 13th generation neopdp panel 比 上一代好左好多。
無乜理由一個咁客 ...
plnl88 發表於 2010-7-1 21:46

Intelligent Frame Creation and 600Hz

I normally talk about the picture processing of TVs in one dedicated section of a review, however, because there is so much marketing about these two features, it is probably wise to have a separate area dedicated to each. As the V20 uses exactly the same technology as the VT20, this is what we had to say in the VT20 review:

So first of all we have the Intelligent Frame Creation (IFC) which is a motion compensation technology that interpolates frames. Basically, this means that the TV looks at upcoming frames in the TV show or Film and then guesses what frames should be added in between to make motion look smoother. The positive effect of this is that all 1080 lines of resolution should become visible on screen. However plasma technology, because of its fast response times, doesn’t really have an issue with motion blur like an LCD TV would. Without the IFC function switched on, and using the FPD Benchmark Blu-ray test pattern, we could clearly make out just over 900 lines of resolution on the moving chart. With IFC turned on it made the resolution more stable to 1080 lines, however it also added some artefacts to the image. When moving to real world material, on both TV tuners and Blu-ray, with IFC engaged (it’s called 24p Smooth Film when BDs are played) the image did look smooth but also gave the image a false ‘soap opera’ look. This means that film, which should have a certain look to it, was now presented like it was shot on cheap digital video cameras. This completely robbed the image of what natural motion it should have and I would recommend leaving it switched off. Not only does motion look odd with IFC on for both Film and TV shows but the processing also adds in artefacts where its guessing goes wrong.

ajnakata

香港v20有冇尼個24p setting? 我記得g10係冇ga

plnl88

香港v20有冇尼個24p setting? 我記得g10係冇ga
ajnakata 發表於 2010-7-1 22:59

有買左 V20H 嘅師兄話有呢個 Advance setting.
好似連 G20 (according to AVForums) 都有 Advance Setting。

plnl88

Intelligent Frame Creation and 600Hz

I normally talk about the picture processing of TVs in one d ...
ajnakata 發表於 2010-7-1 22:42

請恕小子愚魯！
小子唔明師兄想表達什麼？
請師兄明示？