M&K kx-12

yjfnog

回復 9# sunnyt


    好的，谢谢

maddbt

我最近都買左水貨KX12. 佢原先(兩條野)係打左去115v(右邊),香港用電壓制一定要自已打去230v(左邊),fuse唔攪都可以用. 我自已就換左T2A/250v, 都係兩、三蚊粒. (最好換T2A/250v. 因為115v佢用T3A, 依家230v 係double 左電壓, fuse 相對要換細D去protect. Fuse type => F = Fast Acting/Fast Blow; T = Time Delay/Slow Blow 係有分別既, 詳情自已google啦. 其實, 好似插電口附近都有寫230v用T2A. 有錯唔好 )

出廠係115v(右邊)

goro

我最近都買左水貨KX12. 佢原先(兩條野)係打左去115v(右邊),香港用電壓制一定要自已打去230v(左邊),fuse唔攪 ...
maddbt 發表於 2010-5-13 18:32

但係點解之前有ching話要換T3A?

ccmak68

說明書有叫轉230v要換T3A,但我都無換

sunnyt

回復 11# yjfnog

已確認230V 係要打去左邊!

maddbt

但係點解之前有ching話要換T3A?
goro 發表於 2010-5-13 18:59

話說插制前, 我爬文都見有 ching 話睇說明書要換 T3A (會唔會就係 ccmak68 ching )
我睇我本說明書又冇講, 只係話要換fuse .

但係, 我見 KX12 後面係寫住 "230 volts: T2A/250v Time-Delay".


   
我都唔敢輕舉妄動, google 又 search 唔到其他人講換 fuse. 最後, 搵左D關於電嘅野, 得到以上結論. 不過, 電, 我又唔係專科. 最怕自已一知半解, KO左隻新嘅KX12, 水貨又 ..... (下删一萬字). 所以, 我 email 左 eBay 賣家. 下面係佢嘅回覆 (之前係公司開唔到 email), 比大家參考.

Yes the one you received should have been preset for 115 and should have 2 fuses in it, one in use and an extra. If you plug it in with that fuse it will work, but won't be protected. It needs to have the switch moved over to 230v (under the red sticker) and the fuse (below the plug-in hole is a little slide out tray where the fuses are) needs to be changed from 3A/250v slo blow to a 2A/250v slo blow. Right next to the plug it is printed on the back of the sub. thx, rob

Rob A. Internet Sales
Sound Ideas Stereo
roba@soundideasstereo.com<mailto:roba@soundideasstereo.com>

izany

Ching, 請問哪個Low Pass Filter應該怎樣SET...?

yjfnog

回復 12# maddbt


   多谢你 maddbt 兄，非常祥细，今晚先唔换fuse试下。谢谢

yjfnog

回復 15# sunnyt


    多谢你sunnyt 兄，今晚试下有无声先。谢谢

yjfnog

上几张图先，等阵开工。