部後級唔夠Z7好力???

MarkMak · 發表於 2010-4-7 23:53

未加2Ch後級前，喺Z7 setting 裹面調校，volume係-5dB，level係+9dB，用sound meter度到前置左、右喇叭出到74dB。

但係前置左、右聲道由Z7 pre-out 駁落個Rotel RC1080後，volume要校大到-1dB，level係+8.5dB，前置左、右喇叭先出到74dB。

加咗後級照理好力D，volume / level 校細而出到相同聲量 (74dB)，依家返而要校大，真係唔明

唔通部Rotel報大數竟然唔夠部Z7好力

請各c hing指教一下

Specification:
Z7: Minimum RMS Output Power for Front, Center, Surround, Surround Back: 20Hz to 20kHz, 0.04% THD, 8Ohms – 140W; Power Consumption 500W

Rotel RC1080: Continuous Power Output (20-20kHz, <0.03%) – 200W/ch into 8Ohms; Power Consumption 550W

avmilk · 發表於 2010-4-8 00:03

volume at -5dB is ur normal listening sound level?
any gain control for the Rotel?

MarkMak · 發表於 2010-4-8 00:12

volume at -5dB is ur normal listening sound level?
any gain control for the Rotel?
avmilk 發表於 2010-4-8 00:03

My normal listening sound level is around -10dB and there is no gain control for the Rotel

avmilk · 發表於 2010-4-8 00:15

My normal listening sound level is around -10dB and there is no gain control for the Rotel
MarkMak 發表於 2010-4-8 00:12

ic...
ur MRM-1 should be power hungry as need to +9dB to reach 74dB...

MarkMak · 發表於 2010-4-8 00:44

是ROTEL後級增益問題,你聽聲是否好左
timmywan 發表於 2010-4-8 00:25

聽得出係好咗，聽久石讓演奏會D大棚嘢D樂器分離多D同聽多D細節，不過真係唔明點解會甘，恐怕vol越大，失真越高

claero · 發表於 2010-4-8 01:13

i have this problem before becasue some of the power amp needs enough "v" to works the max power of the power amp ......and ususally yamaha was not very enough having the max v for the power amp . i used 2500 and 3800 before .

don't worry about turning the volume high ,u need to turn the "v" number higher so that your power will reach the full working area.you can set the gain or db more so its easier to reach that level .