I agree that c-hing should do a simple check first. Check the power connection, make sure there's power to the amp (all the fuse(s) are okay, all the power cords are connected firmly). Second, check the signal-in cable connections (CDP -> amp). Third, check the signal out connection (amp -> spks). Forth, if all the above are ok but there's still no signal, then try other inputs in amp (e.g. you are using line-in 1 for CDP, then try other line-in, say the tuner input). Fifth, if you have another set of speaker, try connects them to the amp, this could help test if the amp works or not. Sixth, do the same as the fifth but with another amp.
If unfortunately all the above shows that the amp has problem, then call the warranty service.
[複製鏈接]
發表於 2010-3-22 00:06
，過多3個鐘之後再開機，部機不等"達達"聲，宜家好鬼驚...請問點算
樓主
希望有奇蹟出現
如果無就
