買前級先定後級先?

buncc

吓! 前後級不是一起買的嗎? 沒錢就唔好想那麼多了, 忍下啦!

MM622

if you use the same front speaker for av and stero, simple choose stero mode in AV amp. If you use different speaker for av and 2 ch , simple use zone 2 to connect to front speaker  to listen music (  ...
tcflex401 發表於 2010-1-10 18:09

If I use different speaker, I will connect the new speaker (for music) with the Power amp. The power-amp will connected to Pre-out from the AV-Amp. But in this case, will the old 5.1 speaker also 一齊出聲 (even I select Stereo mode in the AV amp, the 5.1's L, R Speaker will  一齊出聲?)?

tcflex401

12# MM622

If you turn on your powerful amp and also use pre-out from AV amp to power amp, only the speakers connected to power amp will turn on. If you don't turn on your power amp, the speaker connect to AV amp will sound.

MM622

12# MM622

If you turn on your powerful amp and also use pre-out from AV amp to power amp, only the speakers connected to power amp will turn on. If you don't turn on your power amp, the speaker con ...
tcflex401 發表於 2010-1-11 01:00

Yes, of-course I know only the speaker to connect with the Power-amp will 出聲 ONLY IF I turn-on the Power-amp.
But when the Power-amp turn-On, the AV-Amp is also turn-on, is that mean my existing 5.1 speaker system also 出聲 ?

tcflex401

14# MM622


No. Only power amp will have sound

francis_leung21

日本AV AMP 樓本冇得做POWER AMP..你有冇見D 師兄求其搵部歐洲POWER AMP 都話有30% UPGRADE 你就知日本AV AMP POWER 幾廢....如果你要影音分家...前後級都係2聲道既前後級...我可以話...AV 前後級要同2CH 前後級相等既級數....價錢都係幾陪以上...因為2CH 用2份POWER...AV 用7份POWER...加上AV 前級....一係就唔太入HI END 門...一係就貴到痴筋......如果2CH 前後級....個PRE-OUT 係駁落2CH 既前級到...你買之前問問就得架啦...依家多數都有...膽前多數都冇...唔知點解...所以好煩...

MM622

I know, Onkyo told me if I use a pure Power-ampo to work with my AV-Am temporary, and if I have another pair of new speaker connect with the power-amp, all I need to do is to connect my power amp with my Av-amp's Zone 2 Pre-Out. And I need to switch my Av-amp remote controller to Zone 2. In this case, my existing 5.1 speaker's L, R speaker will not 出聲.

ericyy

> 如果2CH 前後級....個PRE-OUT 係駁落2CH 既前級到...

兩個 pre-amp 輸出駁埋一齊???!!!

都係個句, 儲夠錢至一次過買啦... 買左後級先: 出到聲不過唔靚聲, 分黎重乜? 買左前級先: 出唔到聲, 放係到擺, 不如擺啲錢落自己度...

MM622

18# ericyy

When 儲夠錢, the price is increase again......

francis_leung21

> 如果2CH 前後級....個PRE-OUT 係駁落2CH 既前級到...

兩個 pre-amp 輸出駁埋一齊???!!!

都係個句, 儲夠錢至一次過買啦... 買左後級先: 出到聲不過唔靚聲, 分黎重乜? 買左前級先: 出唔到聲, 放係到擺, 不如擺啲錢 ...
ericyy 發表於 2010-1-12 08:09

所有前後級既AV BYPASS 都係係前級到架....前級係一個控制器...咁你將SIGNAL 由AV AMP 輸入...AV AMP 話想用2CH 個份POWER...咁2CH 既前級....當你轉佐去AV BYPASS 個制...佢就會幫你跳佐前級個部分直去後級....