Velodyne DD+ 的XLR Output

Dynaudio

請問同一個系列點解個XLR輸出會有唔同？

lnchu

錯版。xlr input係female.output 係male.

pac

左面圖是對的。
右面圖不對的，連vedio out都不是黃色。
是否冒牌？

Dynaudio

咁就有哋亂，以前重係威達做代理時買左個DD+10個XLR OUT就係右邊圖咁，宜家換DD+15係左邊圖咁，睇DD Plus_Users_Manual內的圖有係咁。

Dynaudio

pac 發表於 2018-3-18 17:43
左面圖是對的。
右面圖不對的，連vedio out都不是黃色。
是否冒牌？

video out不是黃色,我估應該係張相解相度低，唔清楚。

lnchu

XLR standard input 係乸output係公,錯成咁？

Dynaudio

lnchu 發表於 2018-3-19 10:16
XLR standard input 係乸output係公,錯成咁？

唔明就係佢個Users Manual內的圖都係咁。網上哋相兩款都有。

Dynaudio

lnchu 發表於 2018-3-19 10:16
XLR standard input 係乸output係公,錯成咁？

網上搵到呢段嘢 https://www.stereophile.com/cont ... e-plus-18-subwoofer

“.......My review sample had a minor glitch. Its rear panel offered six socket-type (input style) XLR chassis connections both for its two balanced inputs and its four balanced outputs. Unlike RCA single-ended interconnects, balanced XLR interconnects have different connectors at each end. Because chassis-mounted XLR jacks conventionally use pin-type jacks for output and sockets for input, balanced cables can be hooked up in only one direction. making it impossible for me to use the DD18+'s balanced inputs.

I notified Velodyne of this problem, and they immediately shipped me XLR adapters that converted the four XLR sockets labeled Output to the proper pin-type XLRs. They assured me that this problem was corrected for the DD-18+'s second production run.....“

MingSir

{:9_419:} 今晚番去望下先 !

Dynaudio

MingSir 發表於 2018-3-19 14:59
今晚番去望下先 !

網上篇嘢日期係2013年3月，後期生產應該係正常的，除左買到存貨。不過個XLR Out put應該唔係好多人會用到。
終於解開我多年來的迷惑。