聲音輸出一問

SubaruBRZ

Thank you very much!

彭婷婷@FB

hdmi1 to TV

2. HDMI audio format
Selects the digital audio output format from the HDMI output.
Auto (default) – The player checks with the device connecting to HDMI output to
automatically determine which audio format to use.
LPCM – Digital audio output via HDMI will be multi-channel Linear PCM format.
When this option is selected, compressed audio bit streams will be decoded by
the player and then sent as multi-channel PCM. This setting is recommended when
connecting the HDMI output directly to a TV or to a receiver without advanced audio
decoding capabilities.
Bitstream – Digital audio output via HDMI will be in bitstream format. This option is
recommended when connecting the HDMI output to an A/V receiver or processor
that supports advanced audio decoding of Dolby TrueHD and DTS-HD Master
Audio etc.
Off – No digital audio output via HDMI

hdmi2 to AV AMP

SubaruBRZ

Thank a lots!

多毛肥

彭婷婷@FB 發表於 2018-2-3 22:24
hdmi1 to TV

2. HDMI audio format

以上設定我試過晒所以好清楚
1:auto--Atmos會變左PCM出HDMI 2,即atmos點唔到燈
2:LPCM--同auto一樣
3:bitstream--atmos經hdmi 2 出amp成功點燈,電視唔會出聲(如果正常),關左amp會自動比番聲比hdmi 1,即電視出聲(此功能令有D用家誤以為amp同電視一齊出聲)
4:off--電視同amp都唔會有聲,可能只有coaxial/optic 有聲但我冇駁所以証明唔到

駁兩條hdmi又要出到atmos,master audio等,只可選bitstream