Pioneer 500A調教問題

Psychoav

有冇師兄有cal過部500A? 用ControlCal開ISF mode同就咁用spyder/eyeone分別大唔大? 有冇人可以分享一吓? thx~

chhanthony

<<<<呢條粉皮幫到你

hintel

http://www.post76.com/discuss/uc_server/avatar.php?uid=2198&size=middle
chhanthony 發表於 2009-12-3 13:45

粉皮1號(專調教plasma)
粉皮2號(專調教projector)

鐵心心

ckmalice

我都想知…

有冇一尐校機心得提供？

鐵心心

ISF mode係非用家手動設定MODE，唔建議用。

如果可以不如用電影mode，再cal。
個亮度鋒值控制係15ftL，係全黑環境下灰階同暗部會好似投影咁柔，
而且電影mode個暗部比較同其他MODE唔同，層次分明平滑一些，
明顯睇BD會比較好

philipifu

鐵心心, I've read a lot of your posts and I'd like to say you are the top guy in this forum.
I've been using the 500a for a few months but it seems to me that the black (full screen of black) really not as black as what other people described. At night, the display gives me a very faint gray color when nothing is showing on the screen. A closer look I could see some tiny light noises blinking on the screen. But when watching movie those black bars (top and bottom) are hardly visible (still visible at a few inches away). I am not complaining anything, I like it very much when comparing it to my old Samsung LCD TV but if you have any suggestion on configuration/settings are highly appreciated. Will ControlCAL helps in this situation? I am using PS3 / Magic TV and both runs HDMI cable.

鐵心心

鐵心心, I've read a lot of your posts and I'd like to say you are the top guy in this forum.
I've been using the 500a for a few months but it seems to me that the black (full screen of black) really  ...
philipifu 發表於 2010-1-22 17:33

其實是正常的，黑邊是接近真正黑，但如專注的去看，還是可分別出500A的黑是有一點光的，
但在看電影是因中間的影像包含光亮表示，你的雙眼因此會曈孔擴大，所以你會感覺上下的黑邊成為了"真黑"
而500A的黑對影像中的對比有一個很好的表達，有了深沉的黑，影像的立體與景深智做得更好，有如少了一層白紗，
而且500A的灰階強勁，暗位層次之出色也令影像的黑不是"死一味去黑"，而是有層次去表達黑色，
加上色準非常，各下好好享受吧

philipifu

Thanks 鐵心心. One more thing I'd like to share. The tv will dim the light down completely a few seconds after I turned off the PS3. I thought the tv was off but in fact it was still on.  The funny thing was I once forgot to turn it off for a night. The next morning I realized the LED light was in Blue. This tv cheated me. Anyway, now I selected the automatic switch off option just in case I did it again.