HDMI over Ethernet

Raymond仔

http://www.futureshop.co.uk/atlo ... at5cat6-p-2200.html

呢個得唔得??

朗

Another opinion: Use Cat. 6 lan cables instead of Cat. 5.

Cat. 6 cable has a '+' shaped plastics to separate 4 pairs of twisted wires into 4 quadrants.  This helps reduce a lot of cross-talking and  ...
hkbomberman 發表於 2009-11-16 14:09

用埋Cat. 7更好.

hkbomberman

In my opinion, the product is good because it needs no power.  But, if possible, I would like to take the ones that require power to operate as it will stabilize and enhance the signals over the lan cables in long length.

http://www.futureshop.co.uk/atlona-powerless-hdmi-extender-over-cat5cat6-p-2200.html

呢個得唔得??
Raymond仔 發表於 2009-11-16 14:35

阿定

其實我想問好耐，可唔可以 HDMI --> CAT5 --> HomePlug --> HomePlug --> CAT5 --> HDMI

psme

I don't think HomePlug work. 1080p60 data rate is 1.5Gbps. If splits in 2 CAT5, each cable carry 750Mbps. HomePlug can not transmit such high rate data!

hkbomberman

Technically, it works as well.  But your AV HDMI signals will go through from one socket, some other power points, main switch box, some other power points, to the final socket.  In addition, the power cables supply power to many other electric appliances which generate a lot of noise / interference.  Home plug connection may not support satisfactorily 1080p / DTS HD / True HD content.  

It is not a good option to do so.  Direct cable connection is much better in AV enjoyment.  

其實我想問好耐，可唔可以 HDMI --> CAT5 --> HomePlug --> HomePlug --> CAT5 --> HDMI
阿定 發表於 2009-11-16 16:41