A500 RC3 Firmware 01-05-160704-25-POP [2016-07-05]

nellwill

[A-500 ] RC 3 Firmware 01-04-160704-25-POP
Release Date: 5 July 2016

A-500
Firmware version: 01-05-160704-25-POP-432-802-rc3.zip
https://www.sendspace.com/file/k4mx5t

NMT Apps version: 01-01-160509-25-POP-432
https://www.sendspace.com/file/w478fk

Firmware Update Steps:
1. Unzip the downloaded file into the root directory of a USB thumb drive
2. Plug the USB thumb drive into USB port of A-500/A-500U
3. Access to Setup->Maintenance in UI
4. Select Firmware Update and press Enter on the "Check For Firmware Update" button
5. If the file a500-update.bin/a500u-update.bin is found in the USB thumb drive, it will prompt for firmware update

NMT Apps Update Steps:
1. Unzip the downloaded file into the root directory of your USB thumb drive
2. Plug the USB thumb drive into USB port of A-500/A-500U
2. Access to Setup->Maintenance->NMT Setup Wizard, and it will start the update when apps.nmt is found in the USB thumb drive

NMT Apps Release Notes:
1. Updated to Transmission 2.92
2. Updated to NZBGet 16.4

Firmware Release Notes:
- Added support for multi-channels ALAC codec (M4A). Note: Gapless playback and ID3 support will implement later.
- Fixed PGS sometimes display too fast issue
- Fixed some FLAC skip few seconds during gapless transition
- Fixed WAV 3, 4, 5 and 7.1 channels unable to start playback issue
- Changed LPCM 3 channels layout from 2.1 to 3.0
- Fixed BDMV/BDISO, M2TS, TS unable to auto stop playback or repeat after finish issue