點插好？

que · 發表於 2016-4-13 08:42

eggman99 發表於 2016-4-13 07:27
Isotek 係唔係明顯比MS好？

其實兩款都冇用過

MS好似真係比較多人話不好
但實際幾多人買過就唔知

我自己只用過MS的插頭
係覺得DIY好易裝

charliey · 發表於 2016-4-13 10:01

本帖最後由 charliey 於 2016-4-13 10:06 編輯

i used MS for around two years before it broke ... don't connect any 2-channel equipment to any sockets with filter...
the best is to have one power bar for 2-channel only, i.e. CD, DAC, 2-ch amp and another power bar for others ...

by the way, finally i switched all 2-channel sockets/power cords to US a few years ago. the US power bar connected to wall with UK socket on wall, then all 2-channel equipment using US power cords linked to such power bar ... US power cords have more (non-expensive) choices ...

eggman99 · 發表於 2016-4-13 13:13

charliey 發表於 2016-4-13 10:01
i used MS for around two years before it broke ... don't connect any 2-channel equipment to any sock ...

If I use one power bar for 2ch (amp, DAC, CDP), should I use filtered or non-filtered? Thanks!

Szelong · 發表於 2016-4-13 14:26

eggman99 發表於 2016-4-13 07:15
美式真好。。

唉，但家保問題，唔怕一萬。。

其實好多機都無左水線，用方面已經不大分別，
不過保險方面又係一個問題，我睇你俾多少少買isotek or isol-8

PF30 只可以搵二手，全新已經無

Szelong · 發表於 2016-4-13 14:28

eggman99 發表於 2016-4-13 13:13
If I use one power bar for 2ch (amp, DAC, CDP), should I use filtered or non-filtered? Thanks!

其實2ch amp 都可以入power filter，但要有support high current 既output

charliey · 發表於 2016-4-13 14:31

eggman99 發表於 2016-4-13 13:13
If I use one power bar for 2ch (amp, DAC, CDP), should I use filtered or non-filtered? Thanks!

don't suggest any filter socket ...

Szelong · 發表於 2016-4-13 14:34

http://www.feversound1.com/lightspeed/

我用緊CLS309,係可以俾power amp 用

eggman99 · 發表於 2016-4-16 01:35

咁如果PS Audio Dectet 呢？有冇人用過？

homealone · 發表於 2016-4-16 08:24

本帖最後由 homealone 於 2016-4-16 08:29 編輯

之前我換美式拖板，朋友說其實好選擇不多，就推薦了我3個價位他覺得比較好。
1. 1千左右就wireworld matrix 2。
2. 3千左右就Oyaide, 不過這個好像只有美式。
3. 1萬樓下就QRT QB4/QB6。
我當然選了最便宜的

(Post76 Android 手機版送出)

[請教] 點插好？

評分

76-FC 綠翡翠勲章

76 榮譽忠義勲章

76-FC 藍寶石勲章