Creating a Update disc to be inserted into your BDP-S360.
- This firmware update is performed with a CD-R to be inserted into your BDP-S360.
Do not use a CD-RW disc. A CD-R disc is highly recommended. - Use a brand new CD-R disc to burn the firmware update. The player may not be able to correctly read a dirty disc or a disc with scratches.
- User need a computer with a CD writer with burning software.
- The downloaded file will create an ISO Image. An ISO image (.iso) is a disk image of an ISO 9660 file system.
- Most CD authoring utilities can write ISO files to a disc. For more information, please check the help files of your CD authoring software.
Check the player firmware version:
o Power on the television and make sure it is tuned to the inputs to which the BDP-S360 player is connected.
o Power on the BDP-S360 Blu-ray Disc player.
o If the player starts to play a disc, press the STOP button and wait until the blue Sony Blu-ray Disc screen is displayed on the television before proceeding.
o At the "xross media bar" (XMB), use the arrow keys on the remote control to highlight Setup > System Settings and then press the ENTER button.
o Use the arrow keys on the remote control to highlight System Information and then press the ENTER button.
o Use the arrow keys on the remote control to select System Information and then press the ENTER button.
o The firmware version currently installed on the BDP-S360 will be listed like below on the television screen:
o If the version number is 007 or higher, it is not necessary to install this firmware update.
Network Update procedure The Network Update operation is straightforward, so it is highly recommended that you use the Network Update method to update the BDP-S360 firmware update. If you cannot connect the BDP-S360 to your Internet source, please use the Update Disc method in the section below. In order to use this update method it is necessary to have the player correctly connected to an active Internet connection. In order to perform the firmware update, it is necessary to have the player correctly connected to a compatible television.
The firmware update process usually takes about 15 to 30 minutes, depending on system configuration and network connection.
Power on the television and make sure it is tuned to the inputs to which the BD player is connected. Connect the LAN terminal on the BD player to your Internet source using an Ethernet cable. Power on the BD player. When disc remains in BD player, please take out disc. At the xrossmediabar (XMB) , use the arrow keys on the remote control to select Setup - Network Update and then press the ENTER button. Perform version update? message is displayed. Select OK and then press the ENTER button. Download process starts and download screen is displayed.
DL */9 (lights up) ("*" changes from "0" to "9," indicating progress) is displayed on TV screen. After download process, the update starts and VUP appears on the player front panel display. When updating:
VUP */9 (lights up) ("*" changes from "0" to "9," indicating progress) is displayed on the player front panel display. The firmware update is complete when FINISH appears on the player front panel display.
VUP -> 0/9-> 1/9 -> …-> 9/9 -> FINISH. Then the power of BD player is off after FINISH gone. Power on the BD player. Check the firmware version.
| 
發表於 2009-11-6 23:39
發表於 2009-11-6 23:59
