Media Player:TviX專區 M-6600N: 1.9.4b4 @ P.33 (2010.1.12)

ikkjr

from MPC Club
http://www.mpcclub.com/modules.p ... ewtopic&t=21803


Public Unofficial DViCo Blu-ray: V99.3.126
And here it is... The updated TViX firmware whihc includes the ability ...
chhanthony 發表於 2009-5-28 13:13

>The updated TViX firmware whihc includes the ability to playback BD copies. notice there is no full menu support. You start the movie and have the ability to select audio and subtitles.

chhanthony兄,
請問新firmware是否巳可睇到m2ts入面既subtitle (E.g. PGS subtitle)

LAWSON

試左唔得了

ikkjr

試左唔得了
LAWSON 發表於 2009-5-30 10:50

LAWSON, thx for sharing.

chhanthony

Official DViCo Discussion: Firmware V1.3.129
Here's another update fixing some issues from the 1.3.125 version...
http://demod.dvico.com/preRelease/tvix_M-6x00_1.3.129.zip

Changes from 1.3.125
1. Added DVI for the TV connection.
- If you are using HDMI to DVI cable, you must select DVI.
- If DVI is selected, HDMI audio output and HD audio pass-through
menu will be disabled.
- If Auto EDID is selected with DVI option, the Video and Audio
option will be set based on the EDID.
- If other than Auto EDID is selected, Audio will be set depends on
the selected TV connection type.
- When user pressed the TV outkey, the DVI will be set for 480P and
576P and audio data will not be transmitted over HDMI. Therefore, if you
use HDMI, you must select correct option on the setup.
- On VFD, DVI will be shown only if DVI is selected. If HDMI is
selected, there will be no info for the TV connection type.
- Fixed DVI motnitor goese black in specific case.

2. Fixed the IP is not correctly reset if the cable is re-connected.

Known issues and limitations for Video related
- Some TP/TS information may not correct.
- When HD Audio pass-through is on, S/PDIF does not output.
- When HD Audio pass-through is off with HD audio stream, the
playback is not smooth.
¡Û When DTS audio setting is digital, HDMI audio is ON and HD
audio pass-through is set to ON, then audio is not heard on the SPDIF
output.
¡Û For the same setting, if HDMI audio is set to OFF, then it
sounds through the SPDIF output.
- Some TP/TS files may cause the system rebooting.
- Some WMV may not play correctly.
- The digital output for AAC/WMA is disabled.
- Does not support PCM audio track on MP4 now.
- Some MKV with AAC may not sound.
- TVIX may not get IP from DHCP server after change between DTV and
Player modes and this can be solved by retrying DHCP on the setup.

Known issues for Audio and pictures playing
- For MP3 files with low sampling frequency, the TVIX might crash
while playing or trick play like FF or RW.
- M4A files are not supported now and AAC may not play correctly.

Known issues for PVR
- After channel changed, you may not here audio in short time. . To
work around it, you can press DTV key or Audio key on the remote.

Known issues for general issues
- If you play files without refreshing the file list after delete
files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, ,
Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass
through on the setup even though you don¡¯t have a receiver that supports
decoding of these formats. Otherwise, you will hear strange noise with
some repetitive popping noise. Currently, we don¡¯t support core
decoding, if you don¡¯t have a HD audio decoder receiver, you need to
select other then these HD audio tracks audio track for now.

chhanthony

原文转自高清加油站：http://www.hdpop.cn/viewthread.php?tid=7763&extra=page%3D1

2009年6月3日发布，版本1.3.129，TViX TVX HD M-6500A/M-7000A 高清播放机升级固件
下载地址：http://demod.dvico.com/preRelease/tvix_M-6x00_1.3.129.zip

相对于1.3.125的改变
1、电视连接中添加DVI选项
- 如果您使用HDMI 转 DVI 线或头连接显示器，您必须选择DVI。
- 如果选择DVI，HDMI音频输出和HD audio pass-through选项将不可使用。
- 选择DVI的情况下如果选择Auto EDID，则视频和音频选项将被基于EDID设置。
- If other than Auto EDID is selected, Audio will be set depends on
the selected TV connection type.
- 当用户按TV out键时，DVI将会被设置为480P和576P并且音频数据不会给HDMI。也就是说，如果您使用HDMI连接，您必须选择正确的选项。
- 在VFD屏幕上，只有选择DVI的情况下DVI会亮。如果选择HDMI，将不会出现电视的连接类型。
- 修复DVI显示器在特殊情况下黑屏的情况。

2、修复了网线重新连接后IP地址不能正确重新分配的问题。

之前与视频相关的问题与改进
- 一些TP/TS视频的文件信息不能正确显示。
- 当HD Audio pass-through打开时，光纤和同轴不输出声音。
- 当HD Audio pass-through关闭时，播放次世代音轨的时候声音不流畅。
-- 当DTS音频输出设置为数字，HDMI音频开并且HD audio pass-through打开时，光纤和同轴没有声音输出。
-- 同样的设置。如果HDMI音频是关闭的，那么光纤和同轴输出声音。
- 一些TP/TS视频文件可能引起系统重新启动。
- 一些WMV可能不能正常播放。
- 不能输出数字的AAC/WMA。
- Does not support PCM audio track on MP4 now.
- 一些含AAC音轨的MKV可能没有声音。
- TVIX may not get IP from DHCP server after change between DTV and
Player modes and this can be solved by retrying DHCP on the setup.

Known issues for Audio and pictures playing
- For MP3 files with low sampling frequency, the TVIX might crash
while playing or trick play like FF or RW.
- M4A files are not supported now and AAC may not play correctly.

Known issues for PVR
- After channel changed, you may not here audio in short time. . To
work around it, you can press DTV key or Audio key on the remote.

Known issues for general issues
- 如果您播放已经通过FTP或者SAMBA服务删除而又没有刷新的文件时，系统会重新启动。

*** 如果您播放的文件带有次世代音轨比如Dolby TrueHD，Dolby Digital Plus, DTS-HD MA or LPCM，您最好打开HD Audio pass through，即使您没有使用功放支持。否则您会听到杂音。目前，我们还不支持次世代音轨的解码，如果您没有支持次世代的功放，您最好选择其它音轨。

chhanthony

from MPC Club

Official DviCo Discussion: Firmware 1.3.132 (Blu-Ray) This is a beta version which supports Universal Jukebox (including BDMV structure) function. The beta version of TVIX software is not fully tested and supported when you have a problem. If you are interest in this new function with possible bugs, feel free to download and try. As you know, you can go back to the original firmware anytime you want.

http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.132.zip

Supporting HDMV files (UJukebox function)

1. The main feature of this firmware is to select a certain audio track or subtitle out of several sorts of those when playing HDMV structured files stored in the HDD.
2. This version of firmware doesn't support all functions of ‘BDMV’ folder, especially the files with profile 1.1 and 2.0 due to the limitation of the hardware.
3. The folder structure should be the same as the original one, otherwise TViX doesn’t playback your HDMV files properly, protected files and the files with HDMV region code either.
4. The ‘Popup Menu’ when pressing the ‘Menu’ button of the remote control while watching HDMV files is either original graphic menu that the title supports or simple menu that Dvico made.
5. There are two ways to playback HDMV files
A. In case that you set the ‘Smart Navigation’ to ‘Smart’ in the TViX Setup Page, HDMV files automatically playback with selecting the main folder.
B. In case that you set the ‘Smart Navigation’ to ‘Normal’ in the TViX Setup Page, you need to select ‘index.bdmv’ files in the HDMV folder.
6. Possible to add the subtitle that HDMV files doesn't’t have.
A. If you want this additional subtitle to be default one, put the file on the same folder index.bdmv located and name must be ‘index.xxx’, for example, index.smi.
B. Possible to change to the additional subtitle while watching by using the ‘Function’ button on the remote control.
7. To change a subtitle language to another one while watching, either press the ‘Menu’ button or the ‘Subtitle’ button on the remote control.
8. To change audio track, press the ‘Audio’ button on the remote control.
9. To go to another chapter, press’ |◀◀’ or ‘▶▶|’ on the remote control or you can press 'Go to' key on the remote.
10. You can use 100 times this version of firmware. The TViX automatically counts down from 100, but it counts one in spite of playing HDMV files 10 times unless you boot the TViX.

*** Possible to play HDMV structured files compressed by ISO format, but you’ve got to select the file even if setting the ‘Smart Navigation’ to ‘Smart’.


Setting the UJukebox Mode in the TViX Setup Page.

1. Set to the ‘Lite’.
Dvico simple menu pops up always.

2. Set to the ‘Basic’
The original graphic menu appears that the title supports. And Dvico simple menu pops up in case of the HDMV files with the menu TVIX don’t support.

HDMV files in IFO folder structure and ISO files.

Most HDMV files stored in IFO folder structure mainly consist of ‘BDMV’ and ‘Certificate’ folder. As explained above, there are two ways to playback the HDMV files, Smart Navigation and selecting index.bdmv. For stable performance, we recommend not to change the folder structure.
Files in ISO format must be selected to be played even if setting ‘Smart Navigation’ to ‘Smart’. ISO files may playback smoothly when played through the network.

Caution.

*** An HD audio receiver and HDMI 1.3 cable are necessary to playback HDMV files.
*** In the TViX Setup page, set the ‘Audio’ to ‘Digital’, ‘HDMI Audio’ to ‘On’, and ‘HD Audio Pass Through’ to ‘On’.
*** It may not work properly in case of no 1.3 HDMI cable, HDMI to DVI connection and analog video mode.
*** Playing HDMV files in public places is strictly prohibited due to the laws and regulations related with license.
*** We recommend to set the ‘Auto Switch’ in the TViX Setup page to either ‘NTSC/1080p24Hz’ or ‘NTSC/PAL/1080p24Hz’, otherwise the resolution of subtitle and menu may not be clear or vivid. It’s one of the hardware limitations.
Best regards,

LAWSON

其實我唔知Jukebox係乜
同埋我改哂BDMV 個名FOLDER做年份,唔知識唔識AUTO呢,試下先得
我而家除左BDMV個FOLDER外,其他都冇DL.唔知係唔係有D野用唔到呢?

chhanthony

初步測試同早前的firmware相差不大
但好像改善了某頻段的低頻過量輸出問題及
修正了24P和60P輸出時brightness 同 contrast的分別
如各位之前為24P及60P的畫面作不同的setting, 記得再出修正
同個字幕大細正常返, 之前太細

chhanthony

其實我唔知Jukebox係乜
同埋我改哂BDMV 個名FOLDER做年份,唔知識唔識AUTO呢,試下先得
我而家除左BDMV個FOLDER外,其他都冇DL.唔知係唔係有D野用唔到呢?
LAWSON 發表於 2009-6-9 12:27

Jukebox好似係自動播放,無乜意思, 呢個firmware同之前無乜分別
Mama Mai都係放唔到

chhanthony

from MPC Club

http://www.mpcclub.com/modules.p ... ewtopic&t=21970

Official DviCo Discussion: Firmware 1.3.137 (Regular)
DOWNLOAD
http://demod.dvico.com/PreRelease/tvix_M-6x00_1.3.137.zip

Changes from 1.3.129
1. Fixed NTP server option is disabled when IP is get properly
through DHCP server.
2. Now TV connection type is set to HDMI even if the EDID is not get
from HDMI.
3. Imporved Enhanced AC3 stream on recorded streams through a tuner.
4. Network stream performance is optimized.
5. For DTV, fixed the recorded file name is not correctly set for
the som Czech stations.

Known issues and limitations for Video related
- Some TP/TS information may not correct.
- When HD Audio pass-through is on, S/PDIF does not output.
- When HD Audio pass-through is off with HD audio stream, the
playback is not smooth.
¡Û When DTS audio setting is digital, HDMI audio is ON and HD
audio pass-through is set to ON, then audio is not heard on the SPDIF
output.
¡Û For the same setting, if HDMI audio is set to OFF, then it
sounds through the SPDIF output.
- Some TP/TS files may cause the system rebooting.
- Some WMV may not play correctly.
- The digital output for AAC/WMA is disabled.
- Does not support PCM audio track on MP4 now.
- TVIX may not get IP from DHCP server after change between DTV and
Player modes and this can be solved by retrying DHCP on the setup.

Known issues for Audio and pictures playing
- For MP3 files with low sampling frequency, the TVIX might crash
while playing or trick play like FF or RW.
- M4A files are not supported now and AAC may not play correctly.

Known issues for PVR
- After channel changed, you may not here audio in short time. . To
work around it, you can press DTV key or Audio key on the remote.

Known issues for general issues
- If you play files without refreshing the file list after delete
files through FTP or SAMBA server, the system will reboot.

*** If you play files with HD audio tracks like Dolby TrueHD, ,
Dolby Digital Plus, DTS-HD MA or LPCM, you better turn on HD Audio pass
through on the setup even though you don¡¯t have a receiver that supports
decoding of these formats. Otherwise, you will hear strange noise with
some repetitive popping noise. Currently, we don¡¯t support core
decoding, if you don¡¯t have a HD audio decoder receiver, you need to
select other then these HD audio tracks audio track for now.