今日捉蛇，未炮製佢

juniorx

C-Hing，唔係淨係扭個的conductors，應該要將兩條wire纏扭成一條，再套網，仲諗到如果可以加條幼銅線做grounding既地線減噪音，一齊纏成一條，可能效果更好，不過呢兩樣我都未買，因秋記星期日唔開。

喇叭線線網: ...
朗 發表於 2-11-2009 06:19 PM

CHING CHING有野請教。
1. 係唔係兩條wire纏扭成一條中間加條幼銅線做grounding? 定係每條WIRE都加銅線? GROUND去邊?
2. 秋記係邊?
3. 現在單條用15MM網，扭埋可能要25-30mm網，但ssp只見最大得20MM. 邊度有?
Thank you C-hing

mightyatoms

Ching, once you group this pair together, you will buy another pair for "Double-run" gala... Hahaha

juniorx

Wah, your action is so quick! Your artwork is so nice, much much better looking than mine....
haha, good that you can hear the big improvement on "Single run".... Enjoy!!!!
mightyatoms 發表於 2-11-2009 07:31 PM

擺左一擔心機＋5,6個鐘架
有D後悔無用古河蕉，$178四粒，而家果D CHEAP CHEAP VOLTOM都$80四粒拉。

donji

May I know are you using bi-amp function? if yes, that is called single run
mightyatoms 發表於 2009-11-2 19:35

Pic 1


Pic 2


Pic 1 係我之前用既方法, 呢個插法係邊一種?
Pic 2 依家用緊既方法, 又係邊一種?

謝謝~~~~

juniorx

34# Foverking
堅，有料到。

mightyatoms

Pls dont beat me if im wrong
Pic 1) Single run
Pic 2) Double run, single wire + Jumper

朗

我得9折，不過比得好鬆手，買16FT返黎度多左成8－9INCH，所以唔使9FT。
juniorx 發表於 2009-11-2 20:19

岩, 我第一批唔醒起, 無預多少少, 都係買8呎, 所以第二批無計要買番同樣長度, 另一個廋sales好鬆手, 買16呎比出17呎, 唯有中置個pair8呎半啦.

朗

唔好意思啊咁多位ching, 容我在此問一問一條好普通既問題...

請問...half run, single run同double run即係點? 因為我mix up晒, 依家我用緊8000s出, 左右各用一pair 線 (4個output (每邊2紅2黑) 用晒, 行biwire) 呢 ...
donji 發表於 2009-11-2 18:15

My own understanding is that SFH PX is a 4-conductors speaker cable (bi-wire speaker cable by its own), versus most other 2-conductors speaker cable. At a minimum, you can use one piece of SFH PX to do bi-amp by connecting the four "+" and "-" two of each, of either the Left & Right Front + L&R Centre Back Surround (bi-amp assign), or the A and B (A + B set of front speaker, not available for centre speaker) Left & Right Front, to the four-input-terminals of each bi-wire speaker, i.e. 4 to 4 conductors. Alternatively, you can do bi-wire at a minimum with one piece of SFH PX connecting the two "+" and "-" of each of the Left & Right Front, and Centre speaker output to the four-input-terminals of each bi-wire speaker, i.e. 2 to 4 conductors. Single run this is.

Using two pieces of SFH PX cables instead of one for the abvoe, I would consider them as double run, i.e. two cables with 8 conductors to handle one four-input-terminals bi-wire speaker. Using three of them will be triple run. Four as quadruple run.

Don't hit my head if I am wrong.

donji

ok...大至上有個concept~~thank you 多位ching幫手解難

另外: 保護網個作用係? 同埋是否熱縮的?

mightyatoms

My own understanding is that SFH PX is a 4-conductors speaker cable (bi-wire speaker cable by its own), versus most other 2-conductors speaker cable. At a minimum, you can use one piece of SFH PX to ...
朗 發表於 2009-11-2 22:24

What a nice & detail explanation.
Im using 2 pcs of SFX for 1 bi-wire speaker, so that is Double run?