|

樓主 |
發表於 2009-10-17 16:02
|
顯示全部樓層
本帖最後由 lemonstar 於 2009-10-17 16:04 編輯
Just checked on the website about the outlook and power rating,.. etc.
唔知街價要幾$呢 
ADCOM (USA)
GFA-7605 and 7607
Multichannel Power Amplifier
• 125 watts x (5) 7 channels into 8 ohms
• Power rig circuit topology
• Gold Plated 5 way binding posts
• Huge torriodial transformers
• Power bandwidth 10 Hz –100kHz
• 12 volt trigger on circuit
• Dimensions 5 x 17 x 14 inches
• Unit weight: 42/48 lbs.
Arcam P777 (Germany):
P777 7 channels
7 x 150 watts per channel (8 ohms, 20Hz-20kHz, all channels driven)
• 7 x 230 watts per channel (4 ohms, 20Hz-20kHz, all channels driven)
• Peak output current +/- 30amps per channel
• Modular construction with seven independent and fully isolated channels
• Four Sanken heavy duty bi-polar output transistors per channel
• Advanced current feedback design with high slew rate and very low distortion at all audio frequencies
• Predominantly aluminium chassis and casework for best sound quality
• Comprehensive protection circuitry
o - DC offset protection
o - VI limiting on each output stage
o - Software controlled thermostatic fan
o - Over temperature protection
Inputs and Outputs
• Balanced (XLR) input connections
• Unbalanced (RCA) inputs with “loop through” output
• 12v Trigger (3.5mm mono jack) input for standby control
Rotel 1075
Model RMB-1075 Continuous Power Output
(20-20 kHz, <0.03%) 5x120 watts /ch / 8 ohms DIN Power Output
(1 kHz, 1%) 5x200 watts /ch / 4 ohms Total Harmonic Distortion
(20 Hz - 20 kHz, 8 ohms) 0.03% maximum cont. rated power
one-half rated power
one watt per channel
Intermodulation Distortion
(60 Hz: 7 kHz, 4:1) -
0.03%, maximum
0.03%, maximum
0.05%, maximum
0.03%, maximum Frequency Response 15Hz - 100kHz +0.5dB, -3dB Damping Factor
(20 - 20,000 Hz, 8 ohms) -
180 Signal to Noise Ratio (IHF A network) 116 dB Input Impedance/Sensitivity 1.0 V / 33 kOhms Power Requirements: 115 volts, 60 Hz (U.S. version)
230 Volts, 50 Hz (European version) Power Consumption: 800 Watts Dimensions (W x H x D): 430 x 188 x 385 mm
16.93" x 7.4" x 15.59" Weight (net): 17kg, 37.4 lbs.
Rotel 1565 (England)
Power Output
All channels driven 100 watts x 5/ch (20-20 kHz, 0.03% THD, 8 ohms)
200 watts x 5/ch (20-20 kHz, 0.03% THD, 4 ohms) THD (20-20,000Hz) 8 ohms, all channels driven < 0.03%
IM Distortion < 0.03% Damping Factor (8 ohms) 400 Gain 27.2 dB Input Sens. / Impedance 1.2 V / 8.3 k ohms Frequency Response (+/-1 dB) 10 - 80 kHz (+3dB) S/N Ratio (IHF A) 109 dB Power Consumption 280 Watts Dimensions (W x H x D) mm 431 x 99 x 339 mm Dimensions (W x H x D) in. 17 x 4 x 13 3/8 in Front Panel Height 2U / 88.1mm / 3 4/8 in Weight (net) 6.0kg / 13.23 lbs
Parasound A51
Continuous power output:
250 watts RMS x 5, 20 Hz - 20 kHz, 8 Ω, all channels driven
400 watts RMS x 5, 20 Hz - 20 kHz, 4 Ω, all channels driven
Current capacity:
60 amperes peak per channel
Power bandwidth:
5 Hz - 100 kHz, +0/-3 dB at 1 watt
Total harmonic distortion:
< 0.2 % at full power
IM distortion: balanced 16 V rms
< 0.04 %
Slew rate:
> 130 V/µsecond
Dynamic headroom:
> 1.5 dB
Interchannel crosstalk:
> 78 dB at 1 kHz;
> 63 dB at 20 kHz
Input sensitivity:
1 V for 28.28 V, THX Reference Lev
Input impedance:
47 k Ω unbalanced; 94 k Ω balanced
S/N ratio:
112 dB, input shorted, IHF A-weighted
Damping factor:
> 1100 at 20 Hz
Voltage:
110V - 120V
Dimensions:
17-1/4" w x 7-5/8" h x 20" d, 7" h without feet
Net weight: 80 lb. |
-
|