Pioneer BDP-05FD + Yamaha 665/765/1065

waimac

各大CHING, 有無可能用 Pioneer BDP-05fd 解碼 HD audio 之後用HDMI去部 Yamaha 665/765/1065用DSP. 咁樣係唔係可以一齊用 HD audio 加 DSP??? Thank you

waimac

因係度搵到個方法唔知得唔得
http://www.soundandvisionmag.com ... ay-disc-player.html

"If you simply want to send a bitstream output to an external receiver for decoding, you need to select Auto in the HDMI Audio Out menu. But if you want the player to first decode soundtracks internally and then send them to the receiver as multichannel PCM over HDMI, you need to select PCM. With the PCM output active, the player can decode the primary high-rez Dolby TrueHD soundtrack when a movie’s secondary audio track (director and cast commentary, for example) is also enabled. The Pioneer’s ability to do this sets it apart from many other players we’ve tested recently, some of which down-rez the main soundtrack to basic Dolby Digital or DTS when secondary audio is active.

Along with testing the player’s bitstream and PCM-over-HDMI output capabilities, I also hooked its multichannel analog output up to my A/V processor’s 6-channel analog input. The BDP-05FD offers only a limited amount of setup options here. You can set the speaker output as either Small or Large (with Small, the electronic crossover point is 100 Hz). But that setting applies to all of the speakers in your system, and there are no center- and surround-channel delay adjustments. (Once again, this audio shortcoming might be addressed in a future firmware update.)"

waimac

I checked the manual, 好似唔得...

claero

actually , there's 2 part of decode or u can say convert . the first was convert dts hd to pcm . u can send pcm to your amp so that u can use your 3d function as well. i did try it before , the average volume was around 4 to 5 lower amd the bass was less .

waimac

So there is still a trade off. I have a question, if I only use standard 5.1 + 2 presence speakers. Does DSP + HD audio compare to DSP without HD audio make a significant different?  Since I love the DSP but don't want to invest too much on AV AMP. If I m satisfy by using KEF 3005 SE.  Thank you