救命!唔知點用spyder3較500a呀

tinghai

11# devilfeifei

尋晚試用Spyder3 同 ColorHCFR + AVS HD 709 pattern 同Oppo83 去較部500A, 大概流程如下

1. xyY Set Contrast (Luminance)
2. Set Brightness (Black Level)
3. 入 Pro-Adjust -> Color Temp-> Manual    Set Grayscale 用 10 IRE -100 IRE pattern and RGB High Low Control
4. 入 Pro-Adjust -> Color Management 用 RYGCBM Color pattern Set Primary and Secondary Color RYGCBM

Grayscale 都OK但 Gamma 同 Secondary Color 就 set 得麻麻,今晚又再試下先. 唔知我個流程對不對?

chhanthony

contrast係用嚟校white level

trycy

我尋日都係 set 我部 500A with Oppo 83。

色溫就冇問題﹐ Gamma 就 below 2.2 (2.08)﹐ 係咪要重複調個 contrast 同 brightness 來達到 Gamma 2.2 呢 ?

色域我就唔係好明點校﹐ 係咪淨係調果六隻色就可以喇 ??
多謝~

火機

如果有人買左......又可以幫我效就好啦...... 水腳費當然唔少得啦....我部係850

chhanthony

如果有人買左......又可以幫我效就好啦...... 水腳費當然唔少得啦....我部係850
火機 發表於 2009-10-7 14:47

參加家訪有人會幫你幫

tinghai

contrast係用嚟校white level
chhanthony 發表於 2009-10-7 12:53

I followed the instruction at http://www.controlcal.com/forum/showthread.php?t=404 by D-nice, one of the most famous ISF calibrator of Pioneer 9G in US. He use Contrast to set peak luminance first. But I have trouble setting the Gamma close to 2.2 and perfect Gamut.

Psychoav

learned so much~~

devilfeifei

controlcal是否可以用usb轉rs232綫嫁?

tinghai

controlcal是否可以用usb轉rs232綫嫁?
devilfeifei 發表於 2009-10-8 18:48

可以,我都係咁用ControlCal->notebook usb-> DB9 straight -> Media Receiver RS232

devilfeifei

你條綫買左幾錢同係邊渡買呀師兄?