1) When the customer is playing music by the Bluetooth connection, the Bluetooth connection is disconnected if a customer skips music or changes the contents.
2) When switching from other Functions to Bluetooth, the product might not be reconnected by Bluetooth.
3) The specific music file (DFF file) cannot be played from USB and the media player.
4) When customer skips Player while continuously using the product for a long time, the product might do the latch. (When the signal of Player changes (change of the resolution etc.) while GUI (menu display etc.) is being displayed, the failure might occur.)
5) When the customer connects a specific projector (BenQ/ W1080ST etc. where there is little EDID information for 3D) with AVR via HDMI, 3D image might not be displayed.
6) Even if the customer sets the SleepTimer Setting to All Zone from Mobile App, Sleep Timer operates in ZONE2 only.
7) When the surround mode is selected to "Auro 3D" or "Auro 2D Surround" by the Auro 3D Upgrade model, Trigger Out is not output even if the Trigger Out setting is On.
8) Even if the customer selects the Ignore in Upgrade Notification displayed by starting the product that doesn't apply Auro 3D Upgrade, Upgrade Message cannot be turned off.
9) If the customer executed Audyssey Auto Setup during the AirPlay, the product outputs a loud sound from the speaker.
10) When Dynamic Volume is turned off with the AMX command, Dynamic EQ is also disabled.
11) The customer selects the Flickr and will try the play of contents, but the content will not be able to play.
請謹記如果要 firmware 升級就最好用 Lan 線直入機背的 Network 輸入插座，升級時間大約40~50 分鐘，途中不能斷電。
發表於 2015-3-25 23:08
