i7 無風扇迷你電腦出左啦

PhantomGTR

colour97 發表於 2015-5-7 01:43
0.10.0,  let me try  previous version.

If 0.10.0, then pls check this out and follow it. http://post76.hk/forum.php?mod=r ... 2&fromuid=80802

colour97

voyage boot up is successful. i changed another usb thumb. but need to go further typing, not sure if if works or not, keep inform.

PhantomGTR

colour97 發表於 2015-5-7 01:51
voyage boot up is successful. i changed another usb thumb. but need to go further typing, not sure i ...

good.
do u mean you've installed voyage mpd in a SSD?  and now want to install it into an usb thumb?

If so, I've just tried, voyage mpd (live iso on usb thumb) doesn't allow me to install it on a usb thumb.

And even I've set up the live usb doesn't to connect and work, after reboot all the setting and stored parameters are gone.

colour97

i used unetbooti to install voyage mpd at usb thumb. and boot it up without any trouble. but please noted that
voyage needs  usb thumb compartable.  try it tomorrow, need to sleep

PhantomGTR

colour97 發表於 2015-5-7 02:03
i used unetbooti to install voyage mpd at usb thumb. and boot it up without any trouble. but please  ...

do u mean use unetbooti to burn the iso into the usb thumb?  If so , that's not installing voyage mpd on that usb thumb.

colour97

do u mean use unetbooti to burn the iso into the usb thumb?  yes

then , am i going to wrong direction?

PhantomGTR

colour97 發表於 2015-5-7 02:20
do u mean use unetbooti to burn the iso into the usb thumb?  yes

then , am i going to wrong directi ...

你用 unetbooti burn 個 iso 入 USB 後，呢隻手指係 live USB。佢可以俾你唔洗 install 就用到 voyage mpd，但所有 setting (e.g. nfs, cifs, library, playlist 等等) 都會係 reboot 後無晒。
佢最重要既作用係用佢嚟 install Voyage MPD 入電腦或其他 compatible 電腦，e.g. ALIX。

所以，
1) 先燒好呢隻手指 (你已做了)；
2) 用佢 boot 機 (你都做了)；
3) install and setup http://post76.hk/forum.php?mod=r ... 6&fromuid=80802

再試試。

colour97

今晚再肉搏過。

colour97

delete

PhantomGTR

colour97 發表於 2015-5-7 21:53
if at this moment, i don't have nas, i am going to plug 1 T ext hard drive to usb in which stored al ...

check from router, if there is a video connected, then input 'ifconfig'
(Post76 Android 手機版送出)