5.
SACD Output
: To select audio output format for SACD. The options are:
•
PCM
– SACD Direct Stream Digital (DSD) data is converted into multi-channel, high-
resolution PCM data. The converted PCM data is then output through HDMI or the internal
DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver that
supports HDMI v1.1 to listen to SACD, please select this option. You may also want to select
this option if you prefer the sound quality of the DSD-to-PCM conversion.
•
DSD
– SACD DSD data is output over HDMI without any conversion. For the analog audio
outputs, DSD data is converted into analog signal directly by the internal DAC. If you use a
receiver that supports HDMI v1.2a with DSD over HDMI, or you prefer the sound quality of
straight DSD to analog, please select this option.
71頁
If your receiver supports HDMI v1.3 with decoding capability for high resolution lossless audio
formats such as Dolby TrueHD and DTS-HD Maste
r Audio, please set
these audio format
options:
o
Secondary Audio: Off
(or On if you need secondary audio)
o
HDMI Audio: Bitstream
o
SACD Output: PCM
(or DSD if the receiver supports DSD over HDMI)
o
H
DCD Decoding: On
(or Off if the receiver can decode HDCD)
o
Coaxial Optical Output:
(any – not in use)
o
LPCM Rate Limit:
(any – not in use)