ProAc 1sc

hellsuper

可能ching 用膽機問題推唔到個低頻出黎， 我用石機低頻都唔算小。 雖然得5" 細細隻。 但低頻都唔算小

chunkit

師兄
小小心得分享. 我用Audiolab 8200 Amp and CD 推 Procac 1sc. 曾嘗試用不同線材，如Inakustik 1002 +502, Audioquest cv8 +cv4， Madison E3 Extreme 1 接線及喇叭線。Madison 給我的感覺是人聲太行及中音並沒有肉地,很不耐聽.現在用上audio note ISIS 接線及Lexus喇叭聲,人聲厚度適中及低音強了很多,給人很舒服的感覺. 樓主是用膽機,用audio note線會不會太濃音,就不得而知.另外樓主好像用原裝jumper,亦可以試用其他jumper, 如Vovox Textura or audio note SPX.

sam12345

有冇試下擺位呀？試下向後及向內移動下！
你左邊空間很大？右邊近牆？

ckh69

chunkit 發表於 2014-6-2 15:07
師兄
小小心得分享. 我用Audiolab 8200 Amp and CD 推 Procac 1sc. 曾嘗試用不同線材，如Inakustik 1002 +5 ...

Thx~師兄，我都有這想法，我可能會入條lSlS LX168或厚肉哋喇叭線

ckh69

mk2 發表於 2014-6-2 09:55
ProAc 1sc D 低頻應該吾大差, 你用乜amp?

AUDl0 SPACE LlNE-3.1＆AS-8iMKll 前後經摩機鄺師父大改

FelixTheCat

Try CBS-5814A (12AU7) in your power amp

cateye1

Tara labs the one sc 幫到你，不过價錢較高

mk2

I am an Audio space user many years ago.  Using 3.1 as pre amp to drive AS 9xxx (KT88) power amp. But no modification. Both treble and base are good.  The output is 4x - to 5x W (Can't remember). The speakers are ProAc R2.5.      
Try the following -
1. Can your AS8i be use as integrated amp.  If is, try it and see any improvement on base.
2. What your previous speakers, did the base decrease when you change the speakers to 1sc?
3. Try using your AV amp to push the 1sc, any improvement in base?

kmc0907

你部KT88推玩黎。。應該有力
(Post76 Android 手機版送出)

kmc0907

你聴边隻CD覺得低音唔勁先？同麻你对喇叭應該比唔你想要的低頻
(Post76 Android 手機版送出)