Naim remote頻道撞左請問如何解決

edlam85

用緊 Naim XS  和Naim UnitiQute 2 , 重設左部unitiqute 之後就出現這個問題

chuwing

問威達....

beerboy

chuwing 發表於 2014-3-13 17:52
問威達....

我仲以爲你叫人換機添....

PP-HK

請問重設前係咪冇呢個問題?

chuwing

beerboy 發表於 2014-3-13 17:58
我仲以爲你叫人換機添....

首領：原來你地咁睇我
你睇番我D Post丫；我已經好小叫人换野

beerboy

chuwing 發表於 2014-3-13 18:33
首領：原來你地咁睇我
你睇番我D Post丫；我已經好小叫人换野  ...

我知...所以咪唔好囉....

edlam85

感謝技安兄，打去威達已經教了我方法之後上網找到。
2.4 If the unit stops responding to remote control commands try resetting the remote handset as follows: Press, all at the same time, the “aux”, “i” and “5” keys. This will reset the handset to System Code 13. 2.6 If the remote still does not control the unit reset the unit's System code as follows: Turn the unit off. After about 20 seconds turn it back on and while the logo is displayed on the screen point the remote handset at the unit and press the “aux”, “i” and “5” keys all at the same time, as described above. The screen will display “IR COMMS System Code 13” to confirm the change has been made.

chuwing

beerboy 發表於 2014-3-13 18:39
我知...所以咪唔好囉....

唉.....宜家都冇乜心機係呢處狗up....只得你好玩D

beerboy

chuwing 發表於 2014-3-13 20:51
唉.....宜家都冇乜心機係呢處狗up....只得你好玩D

做乜姐.. 一齊玩囉...

edlam85

一齊玩啦！