用左先鋒AMP個MCACC後

cakecake · 發表於 2011-7-31 23:54

cakecake, 小瑟 Ching, 想向你們請教有關於先鋒 LX73/LX83 兩 Menu Function!
1) HOME MENU ===> 4 System ...
nccfan 發表於 2011-7-31 22:58

兩年前既post都找得到, 師兄好野

第一條小弟答唔到你, 因小弟無玩AV一段日子了

第二條, 依師兄你視聽既面積, x-curve唔開是OK的(Off 左應該好D). 不過耳聽到的為準^_^

nccfan · 發表於 2011-8-1 00:04

兩年前既post都找得到, 師兄好野

第二條, 依師兄你視聽既 ..

多謝 cakecake ching提示 Thanks

鐵心心 · 發表於 2011-8-1 00:14

第二條,

如果你空間反射高音好勁,就可以用佢收收個高頻

E個個POST都幾舊

ming2002 · 發表於 2011-9-23 15:26

本帖最後由 ming2002 於 2011-9-23 15:45 編輯

回復 20# nccfan

the "skip" function is used to skip the display from the left big knob on your on your front panel. e.g. if you set Skip of CD to "On", the "CD" will not be shown up when you turn the left knob.

nccfan · 發表於 2011-9-23 22:22

回復 nccfan

the "skip" function is used to skip the display from the left big knob on your o ..

WELL NOTED WITH MANY THANKS......CHING 你真係好有研究

多謝

eva0083hk · 發表於 2011-9-23 23:15

講開就問下, MCACC後, 拾仔好細聲下(setting途中話我隻拾仔volume太大... ), 是否正常? THX!

nccfan · 發表於 2011-9-23 23:37

講開就問下, MCACC後, 拾仔好細聲下(setting途中話我隻拾仔volume太大... ), 是否正常?

CHING, MCACC 後...再用 Sound Level Meter Check 吓 ....(MCACC 基本冇0甘準架,有時都會有差別架 except speaker's distance.)......慢慢試吓啦

ming2002 · 發表於 2011-9-24 00:01

回復 26# eva0083hk

It is normal. MCACC will try to balance the volume among all your speakers. If even it sets your sub to -10 and other channels to +10 but still cannot get a balanced volume, it will say your sub is too loud.

For me I'm using a 12" sub in a listening area of 130', I need to turn the sub volume to 30% otherwise MCACC will say it is too loud.

Interestingly most C Hing (including me) will think that the volume of bass set by MCACC is not enough. So normally I'll increase the sub by ~3 to 5 dB after the Auto MCACC

to exaggerate the bass impact.

[討論] 用左先鋒AMP個MCACC後

76 榮譽忠義勲章

76 榮譽VIP勲章

76-FC 綠翡翠勲章

76 榮譽貢獻勲章

76 榮譽慈善家勲章

76-FC 藍寶石勲章

76 榮譽版主勲章

76星級影音勲章

76 精選榮譽會員勲章