Visaton 喇叭

Wilmer威馬

ANWKLO 發表於 2013-2-11 18:21
香港人唔識真係唔出奇, 香港又無代理, 但是係德國專做喇叭同單元配件的
http://www.visaton. ...

KIT 喎！問清楚，鬼佬喇叭 KIT 唔一定包個箱

ANWKLO

Wilmer威馬 發表於 2013-2-12 00:25
KIT 喎！問清楚，鬼佬喇叭 KIT 唔一定包個箱

的確係老牌子. 係呀, 之前個加拿大網係唔包個箱.


這個新加坡網可能包個箱, 當然貴好多啦.
http://www.loudspeaker.com.sg/shop/product_info.php?manufacturers_id=1&products_id=486

Wilmer威馬

ANWKLO 發表於 2013-2-12 00:40
的確係老牌子. 係呀, 之前個加拿大網係唔包個箱.

咁不如大陸訂箱？

ANWKLO

Wilmer威馬 發表於 2013-2-12 02:03
咁不如大陸訂箱？

馬爺, 大陸訂箱? 對我來講好陌生, 唔知搞唔搞得掂

Wilmer威馬

ANWKLO 發表於 2013-2-12 10:14
馬爺, 大陸訂箱? 對我來講好陌生, 唔知搞唔搞得掂

響淘仔搵，例如：
http://item.taobao.com/item.htm? ... &id=19154216888

ANWKLO

Wilmer威馬 發表於 2013-2-12 11:10
響淘仔搵，例如：
http://item.taobao.com/item.htm?spm=a230r.1.10.100.r90Gv7&id=19154216888

唔該, 係咪比幅圖(第三頁)佢地, 唔知佢地明唔明白
https://www.solen.ca/pdf/visaton/kits/couplet.pdf

Wilmer威馬

ANWKLO 發表於 2013-2-12 11:19
唔該, 係咪比幅圖(第三頁)佢地, 唔知佢地明唔明白
https://www.solen.ca/pdf/visaton/kits/co ...

係，比幅圖佢地，點做一定明，争在誤差幾多（一定有）要講明白，同埋木皮/木紋/上漆等等呢 d 外觀野要商量清楚。

工期通常有遲冇早，你一係打打價、問埋運費比較下，決定大陸訂定跟 KIT 訂，仲有，因為鬼佬因為 labour 貴，好多野都肯去 DIY，加上慳運費同避免損壞，跟 KIT 訂未必係成品箱，可能只係一套裁好 o既木板，你要問清楚。

ANWKLO

Wilmer威馬 發表於 2013-2-12 11:49
係，比幅圖佢地，點做一定明，争在誤差幾多（一定有）要講明白，同埋木皮/木紋/上漆等等呢 d 外觀野要商 ...

的資料好有用  係啦, 跟KIT得個幾塊板, 開個窿擺喇叭單都要自己來

Construction

All the cabinet panels are cut from 19 mm
chipboard or medium density fibreboard,
butt-jointed and glued. The chamfers on
the baffle can be applied with a power
jig or circular saw set to 45° or applied
later using an orbital sander.
Next, cut out the openings for the drivers,
the bass reflex tube and the terminals.


Due to the small size of the cut-outs
in the baffle, it is difficult to mount the
crossover inside the speaker cabinet.
It would be possible to make the base
removable. However, it is easier to wrap
the crossover in damping material and
place it through the lower cut-out in the
baffle on the floor of the cabinet. When
you begin fitting the drivers, start with the
bass reflex tube. In order to be able to
get the inner trumpet flange through the
opening for the upper subwoofer it will
be necessary to carefully remove about
5 mm from both sides of the flange.

ANWKLO

Wilmer威馬 發表於 2013-2-12 11:10
響淘仔搵，例如：
http://item.taobao.com/item.htm?spm=a230r.1.10.100.r90Gv7&id=19154216888

個網站話:

"通常情况一对不接，除非是老客户或者谈得来的"

Wilmer威馬

ANWKLO 發表於 2013-2-12 12:15
個網站話:  

"通常情况一对不接，除非是老客户或者谈得来的"

你自己 search 下，我有講明「例如」，只係搵個 example for your reference，唔係叫你就搵呢間